Hardwood forests and plantations are an important economic resource for the forest products industry worldwide and to the international trade of lumber and logs. Hardwood trees are also planted for ecological reasons, for example, wildlife habitat, native woodland restoration, and riparian buffers. The demand for quality hardwood from tree plantations will continue to rise as the worldwide consumption of forest products increases. Tree improvement of temperate hardwoods has lagged behind that of coniferous species and hardwoods of the genera Populus and Eucalyptus. The development of marker systems has become an almost necessary complement to the classical breeding and improvement of hardwood tree populations for superior growth, form, and timber characteristics. Molecular markers are especially valuable for determining the reproductive biology and population structure of natural forests and plantations, and the identity of genes affecting quantitative traits. Clonal reproduction of commercially important hardwood tree species provides improved planting stock for use in progeny testing and production forestry. Development of in vitro and conventional vegetative propagation methods allows mass production of clones of mature, elite genotypes or genetically improved genotypes. Genetic modification of hardwood tree species could potentially produce trees with herbicide tolerance, disease and pest resistance, improved wood quality, and reproductive manipulations for commercial plantations. This review concentrates on recent advances in conventional breeding and selection, molecular marker application, in vitro culture, and genetic transformation, and discusses the future challenges and opportunities for valuable temperate (or “fine”) hardwood tree improvement.

On a worldwide basis, parasitic weeds represent one of the most destructive and intractable problems to agricultural production in both developed and developing countries. About 20 families (3,000–5,000 species) of higher plants are parasitic on the plant kingdom and may cause production losses of 30–80% in staple food and industrial crops on every continent. Compared with the other weeds, parasitic weeds are difficult to control by conventional means because of their life style: Parasites are intimately involved with the host and have so much metabolic overlap with the host that differential treatments are very difficult to develop. In some cases, the parasites are closely associated to the host root, concealed underground, and undiagnosed until they irreversible damage the crop. Several different approaches (cultural, mechanical, chemical, use of resistant varieties, and biological) to control parasitic weeds are currently in use, but are only partially successful. Recent reviews have covered the physiology and interactions between parasitic plants and their hosts, taxonomy, and the biology and classical control of parasitic weeds. The current review will discuss why alternative methods are needed to control parasitic weeds and will summarize conventional and new biotechnology-based control measures against the major world pests Striga, Orobanche, Cuscuta, and mistletoes (Phoradendron and Viscum genera). Effectiveness, advantages and disadvantages, environment safety, and simplicity of these new biotechnological methods will be reviewed.

Plant-based medicines have an important role in the lives of millions of people. The ancient knowledge of the use of plants as medicines has led to the discovery of many important western pharmaceuticals, and the popularity of whole plant preparations for a range of therapeutic applications is growing rapidly. However, there are many challenges in the production of plant-based medicines, many of which put both the consumer and the plant populations at risk. Modern biotechnology can be optimized to mass-produce plants of specific chemical composition for use as particular treatments and applications. In this review, we have used one of the most important medicinal plant genera, Scutellaria, as a model to assess the potential of applications of biotechnology for the improvement of medicinal plants.

The presence of resistant selectable marker genes and other added DNAs such as the vector backbone sequence in transgenic plant might be an unpredictable hazard to the ecosystem as well as to human health, which have affected the safe assessment of transgenic plants seriously. Using minimal gene expression cassette (containing the promoter, coding region, and terminator) without vector backbone sequence for particle bombardment is the new trend of plant genetic transformation. In the present paper, we co-transformed the selectable marker bar gene cassette and non-selected cecropinB gene cassette into rice (Oryza sativa L.) by particle bombardment, then eliminated the selectable marker bar gene in R₁ generation applying the hereditary segregation strategy and attained two safe transgenic plants only harboring cecropinB gene cassettes without any superfluous DNA. This is the fist report indicating that the combination of minimal gene cassettes transformation with the co-transformation and segregation strategy can generate selectable marker-free transgenic plants, which will promote the advancement in plant genetic engineering greatly.

Zygotic embryos at different developmental stages were tested for their potential in the initiation of embryogenic suspensor mass (ESM) lines using immature seeds of Pinus rigida×P. taeda. The highest frequency (1.1%) of ESM was obtained with explants from cones collected on July 1. All excised embryos of the July 1 collection were at the early proembryo stage. Two different culture media were compared. Forty-eight ESM lines were initiated on Pinus taeda basal medium (P6) (0.97%) with 13.5 μM 2,4-dichlorophenoxyacetic acid (2,4-D) and 4.4 μM benzyladenine (BA). However, only four ESM were obtained on a modified Murashige and Skoog medium (MSG; 0.55%). Most of the ESM arose from the seeds that were at the stages ranging from late cleavage polyembry-ony to the early staged proembryo. Out of 52 lines (0.46%) that were produced from 11,388 explants, only two viable lines (0.018%) (PRT11 and PRT28) survived. As for somatic embryo maturation, the highest number (224/g⁻¹ FW) of matured cotyledonary somatic embryos (line PRT 28) was obtained on a medium containing 100 μM abscisic acid (ABA), 0.2 M maltose, and 1.2% gellan gum. For germination of the somatic embryos, the cotyledonary somatic embryos derived from maturation medium were transferred on half-strength Litvay medium (LM) plus 0.4% gellan gum. The germination rates were high (71.4–96.3%) regardless of the concentrations of either ABA or gellan gum in the maturation medium. Approximately 500 somatic plants were recovered from the germination medium and transferred to the green house; finally most of them were transplanted successfully to the experimental field.

Plant regeneration of Prunus salicina (Japanese plum) using mature seeds was studied and evaluated. Shoots were effectively induced from hypocotyl slices of mature seeds on media containing cytokinins. Among three plant growth regulators evaluated, thidiazuron (TDZ) was the most effective for shoot induction overall. Shoots were also induced using 6-benzylaminopurine (BA), but the effectiveness was reduced at low concentrations. Low regeneration was induced using kinetin. Three plum varieties were evaluated and the regeneration appeared to be genotype dependent. Induced shoots elongated, roots formed, and plantlets developed upon transfer of the shoots to the rooting medium. Primary shoots, when sub-cultured on fresh induction medium, produced multiple shoots, and such multiplication could continue for more cycles. The plantlets were transferred to soil, and the full plants were readily recovered in a greenhouse. The regeneration process was relatively fast as plants could be recovered in 4 to 5 mo. after the culture initiation.

The objective of this work was to enhance the quality and quantity of microspore-derived embryos of cruciferous species by using polyethylene glycol (PEG) to replace sucrose in the culture medium. The main advantage in using PEG is that it produces embryos that are morphologically more similar to zygotic embryos and have enhanced germination capabilities. When microspores were cultured in full strength NLN medium supplemented with 25% (w/v) PEG, the addition of 3 ml of full strength NLN with 13% (w/v) sucrose at 14 d was beneficial for embryo quality and quantity. Experiments showed that this PEG system could be used for a number of Brassica napus cultivars, as well as a number of other cruciferous species. PEG enhanced microspore embryogenesis in B. nigra, Crambe abyssinica, and Raphanus oleifera. Microspore-derived embryos were obtained from all cruciferous species evaluated (B. alboglabra, B. carinata, B. juncea, B. rapa, B. nigra, R. oleifera, Crambe abyssinica, Sinapis alba) using either sucrose or PEG as the osmoticum. Microspore embryogenesis was induced in B. napus in PEG-based cultures without a 32°C heat shock (i.e., 4, 15, 18, and 24°C). These temperature conditions were non-inductive when sucrose was used as the osmoticum. Spontaneous chromosome doubling occurred in 64–92% of the regenerated plants when PEG was used in the NLN culture medium, whereas in culture medium containing sucrose, the spontaneous doubling rate was 2–18%.

Shoots of the marubakaido apple rootstock grown in culture medium containing BBL agar presented significantly lower multiplication rate (MR) compared to MRs found for shoots grown in medium containing A-7002, A-7921, Select, and Phytagar as gelling agents. In addition, significant hyperhydricity was found for shoots grown in Phytagar and A-7921 agar-containing media. Analysis of elastic (G′) and viscous (G ) modulus showed that for all of the five agar brands used in this study, G′ was always much higher, i.e., typically one order of magnitude higher than G, which characterizes a strong gel. G′ changed randomly with time for all of the agar brands studied, except for BBL, which presented progressive decline in G′ throughout the culture cycle. Examination of G′, within the same week, showed that Select agar always had the smallest G′, while Phytagar always had the highest G′. Analysis of the loss tangent (tan δ =G/G′), a better indicator for gel behavior compared to G′ isolated, showed that tan δ for Select and Phytagar were always between tan δ values found for A-7002 and BBL. In addition, analysis of tan δ also indicated that BBL and Select agars showed a significantly weaker gel network, compared to Phytagar, A-7002 and A-7921 agars after the third week of culture. When seen together, these results indicate that shoot performance for the marubakaido rootstock is not related to agar gel strength. In addition, the high hyperhydricity rate found for shoots grown on agars A-7921 and Phytagar could not be related to agar gel strength, as well. Analysis of HPSEC profiles indicated that the best performance, i.e., multiplication rate, of marubakaido shoots in agars A-7002 and A-7921 is likely to be related to their lower polydispersity and/or smaller amount of high molecular weight fractions, compared to BBL, Phytagar, and Select agars.

Three cassava clones (SOM-1, “05”, and “50”) were cultured in vitro on MS medium plus sucrose (30 g L⁻¹) and myo-inositol (100 mg L⁻¹) without plant growth regulators and with additions of 0 (control), 0.5, 1, 1.5, 2, 2.5, and 3 g L⁻¹ NaCl to test their salt tolerance. The same cassava clones were cultivated in greenhouse conditions on a sandy soil substratum and irrigated with 20% strength Hoagland solution, and additions of 0, 4, and 8 g L⁻¹ of NaCl. Salinity negatively affected the survival, development, leaf water content, and mineral composition (mainly by accumulation of Cl and Na) of both in vitro and ex vitro plants, but with different intensity in each clone. In both conditions of culture (in vitro and ex vitro) clone SOM-1, from a desert arid saline zone of Somalia, was the most tolerant and clone “05”, from a rainy region of Ivory Coast, the most sensitive. Clone “50” tolerance to in vitro salt treatments, although lower, was not significantly different from that of SOM-1 but the ex vitro response was similar to “05”. In general, there was a correlation between in vitro and ex vitro behavior of the cassava plant regarding salt tolerance, which would allow the in vitro culture method to be used for selection of salt-tolerant plants of this crop.

The objective of this study was to determine if the growth of sweet orange (Citrus sinensis (L.) Osbeck cv. ‘Valencia’) nonembryogenic callus could be regulated and controlled via the mineral nutrient components of the medium. The 14 salts comprising Murashige and Skoog (MS) basal medium were subdivided into five component groups. These five groups constituted the independent factors in the design. A five-dimensional hypervolume constituted the experimental design space. Design points were selected algorithmically by D-optimality criteria to sample of the design space. Growth of the callus at each design point was measured as % increase of fresh weight at 14 d. An analysis of variance was conducted and a response surface polynomial model generated. Model validation was conducted by mining the polynomial for design points to two regions—“MS-like” growth and MS 25% growth and comparing callus growth to predicted growth. Five of the eight selected MS-like points and three of the six MS 25% growth points validated, indicating regions within the design space where growth was equivalent to MS, but the salt combinations were substantially different from MS, and a smaller region where growth exceeded MS by greater than 25%. NH₄NO₃ and Fe were identified as important factors affecting callus growth. A second experiment was conducted where NH₄NO₃ and Fe were varied, thus creating a two-dimensional slice through the region of greatest callus growth and provided increased resolution of the response.