How to translate text using browser tools
1 May 2007 Wave Run-Up on the Zeebrugge Rubble Mound Breakwater: Full-Scale Measurement Results
Julien De Rouck, Björn Van de Walle, Peter Troch, Jentsje van der Meer, Luc Van Damme, Josep R. Medina, Marc Willems, Peter Frigaard
Author Affiliations +
Abstract

Full-scale wave run-up measurements have been carried out on the Zeebrugge rubble mound breakwater in the frame of the EU-funded OPTICREST project. Wave run-up has been measured by a run-up gauge and by a so-called spi-derweb system. The dimensionless wave run-up value Ru2%/Hm0 measured in Zeebrugge equals 1.77 for Iribarren number ξom = 3.63. An (apparent) influence of the water level on wave run-up has been observed. The porosity of the armor layer has a significant influence on wave run-up and may explain the dependency of wave run-up on the water level observed in Zeebrugge. Full-scale measurement results have been compared to literature data. The full-scale wave run-up data are in good agreement with the existing results of wave run-up tests with rip-rap slopes but are clearly higher than other wave run-up data resulting from tests with rubble mound breakwaters.

Julien De Rouck, Björn Van de Walle, Peter Troch, Jentsje van der Meer, Luc Van Damme, Josep R. Medina, Marc Willems, and Peter Frigaard "Wave Run-Up on the Zeebrugge Rubble Mound Breakwater: Full-Scale Measurement Results," Journal of Coastal Research 2007(233), 577-583, (1 May 2007). https://doi.org/10.2112/04-0157.1
Received: 23 January 2004; Accepted: 3 January 2005; Published: 1 May 2007
KEYWORDS
gauge
grooved cubes
Prototype
RIGHTS & PERMISSIONS
Get copyright permission
Back to Top