Translator Disclaimer
1 April 2013 Wave loadings acting on Overtopping Breakwater for Energy Conversion
Author Affiliations +
Abstract

Vicinanza, D., Nørgaard, J.H., Contestabile, P. and Andersen, T.L., 2013. Wave loadings acting on Overtopping BReakwater for Energy Conversion.

Any kind of Wave Energy Converter (WEC) requires information on reliability of technology and on time required for the return of the investment (reasonable payback). The structural response is one of the most important parameters to take in to account for a consistent assessment on innovative devices. This paper presents results on wave loading acting on an hybrid WEC named Overtopping BReakwater for Energy Conversion (OBREC). The new design is based on the concept of an integration between a traditional rubble mound breakwater and a front reservoir designed to store the wave overtopping from the incoming wave to produce electricity. 2D hydraulic model tests were carried out at the Department of Civil Engineering, Aalborg University (Denmark). The analyses of hydraulic model tests have identified the main shapes assumed by wave surfaces at the breakwater and respective spatial and temporal pressure distributions. Load measurements were compared with the most used prediction method for traditional breakwaters, available in the Coastal Engineering Manual (U.S. Army Corps of Engineers, 2002). These results suggest to use the experimental data as design loadings since the design criteria for the innovative OBREC are under development.

Diego Vicinanza, Jørgen Harck Nørgaard, Pasquale Contestabile, and Thomas Lykke Andersen "Wave loadings acting on Overtopping Breakwater for Energy Conversion," Journal of Coastal Research 65(sp2), 1669-1674, (1 April 2013). https://doi.org/10.2112/SI65-282.1
Received: 7 December 2012; Accepted: 6 March 2013; Published: 1 April 2013
JOURNAL ARTICLE
6 PAGES


SHARE
ARTICLE IMPACT
RIGHTS & PERMISSIONS
Get copyright permission
Back to Top