How to translate text using browser tools
1 May 2017 Solid-state Ion Selective Lab Chip Sensor for On-site Measurement of Orthophosphate in Small Volumes of Liquid
Jeong-Yep Han, Jooyong Lee, Yong-Gu Lee, Am Jang
Author Affiliations +

Han, J.-Y.; Lee, J.; Lee, Y.-G., and Jang, A., 2017. Solid-state ion selective lab chip sensor for on-site measurement of orthophosphate in small volumes of liquid. In: Lee, J.L.; Griffiths, T.; Lotan, A.; Suh, K.-S., and Lee, J. (eds.), The 2nd International Water Safety Symposium. Journal of Coastal Research, Special Issue No. 79, pp. 50–54. Coconut Creek (Florida), ISSN 0749-0208.

This paper described the characterization of the assembled solid-state ion-selective lab chip sensor to potentiometrically measure phosphate ion. Since the assembled chip sensor is easy to setup and does not require any sample preparations, it is an ideal technique to study the measurement of phosphate in small volumes of liquids or in estuarine sediments. The size of the proposed lab chip is 12 mm × 21 mm, and the microfluidic channel has the width of 2 mm, length of 5 mm, and depth of 150 μm. All electrodes have the length of 500 μm, width of 200 μm, and spacing of 200 μm. The potential response of the assembled phosphate ion-selective lab chip sensor showed a linear regression in the range of 1×10−5 to 1×10−3 M with a slope of 54 mV/decade. In addition, the experimental results showed a good precision, indicating that relative standard deviation (RSD) was 3.5%.

©Coastal Education and Research Foundation, Inc. 2017
Jeong-Yep Han, Jooyong Lee, Yong-Gu Lee, and Am Jang "Solid-state Ion Selective Lab Chip Sensor for On-site Measurement of Orthophosphate in Small Volumes of Liquid," Journal of Coastal Research 79(sp1), 50-54, (1 May 2017).
Received: 30 September 2016; Accepted: 31 October 2016; Published: 1 May 2017
lab chip sensor
phosphate ion
Pore water
Get copyright permission
Back to Top