Tak, W.J.; Jun, K.W., Kin, S.D., and Lee, H.J., 2020. Using drone and LiDAR to assess coastal erosion and shoreline change due to the construction of coastal structures. In: Malvárez, G. and Navas, F. (eds.), Global Coastal Issues of 2020. Journal of Coastal Research, Special Issue No. 95, pp. 674-678. Coconut Creek (Florida), ISSN 0749-0208.

Recently, The construction of structures on the coastal zone near estuaries, which are the supply sources of sediments, causes a variation in the waterway; this induces a change in the surrounding coasts, and the resulting coastal erosion can adversely affect the lives of the local residents. In the case of a balanced sediment flow, the quantity of the sediment deposited on the coast is equal to the quantity of the released sediment. However, an increase in either of the quantities causes an imbalance in the sediment transport; consequently, the sand is either deposited or eroded in the coastal or proximate shore regions. In this study, the changes in the shoreline and Wolcheon Beach region located on the east coast of Korea was monitored between 2010 to 2019 investigate the phenomena of coastal erosion and beach deformation. The shorelines, beach width, and beach profile were primarily monitored by employing a drone and a terrestrial LiDAR. The results showed that the sediments were transported northward in summer and southward in winter until 2010 in Wolcheon Beach; however, this seasonal sediment transport was blocked during 2011–2012 by the construction of coastal structures such as breakwaters, leading to partial coastal erosion and sedimentation. Wolcheon Beach originally had the coastal characteristics of the Korean East Coast region (2010), but the sediment transport changed due to the variations in the waterway by the construction of coastal structures, leading to a significant change in the coast (2011). In addition, the northern beach volume increased with respect to estuary, while the southern beach volume decreased. When the offshore breakwater was constructed, the northward sediment occurred dominantly in the shield area. In particular, the planar layout of the harbor facilities concentrated the waves, which increased the quantity of the northward sediment.