Here we report a new cricetid s.l., Caecocricetodon yani, gen. et sp. nov., discovered in the early Oligocene of the Caijiachong Formation in Yunnan Province, China. The new cricetid differs from all known cricetids or stem muroids by its particular molar pattern displaying numerous crests and spurs. Our phylogenetic analysis based on a matrix including 42 taxa and 72 characters indicates that the new species has a close relationship with Paracricetodontinae, forming a monophyletic clade with Paracricetodon and Trakymys. The new cricetid also has a likely close relationship with Pappocricetodon. However, the genus Pappocricetodon is polyphyletic in our analysis. Considering the similarity of the brachydont lophodont teeth of Caecocricetodon and glirids, we propose that the new species underwent convergent evolution with dormice, possibly adapting to an arboreal ecological niche in Oligocene of southern China.
INTRODUCTION
Cricetids, including extant hamsters, are the second most species-rich family of rodents. Among stem muroids, the first record of this family traces back to the middle Eocene of China (Pappocricetodon antiquus Wang and Dawson, 1994; Palasiomys conulus Tong, 1997). However, they only started to diversify rapidly since their arrival in Europe and North America at the beginning of the Oligocene. During the last two decades, many new extinct species and several new genera were added into the family Cricetidae s.l. With these new discoveries, some phylogenetic analyses were performed in order to better understand the origin and evolution of the family (Gomes Rodrigues et al., 2010; Maridet and Ni, 2013).
The specimens of a new cricetid rodent were discovered at Caijiachong in Yunnan Province, China (Fig. 1). The Caijiachong mammalian fossil localities lie in Yuezhou Basin, about 20 km southeast of Qujing City. Mammalian remains were discovered from at least six fossiliferous layers in the Caijiachong Formation, which is a set of sediments consisting of gray and light grayish-green sandstone or sandy mudstone and a grayish-white marlstone bed. In the past decade, abundant mammal fossils were discovered from a fossiliferous layer in the upper part of the Caijiachong Formation at the Lijiawa locality. The fossils include the earliest-known tree shrew Ptilocercus kylin Li and Ni, 2016, diverse primates, and several new species of cricetids s.l., such as Paracricetops virgatoincisus Maridet and Ni, 2013 and Cricetops auster Li et al., 2016 (Maridet and Ni 2013; Li and Ni, 2016; Li et al., 2016; Ni et al., 2016). The assemblage of these diverse mammals indicates an age of early Oligocene and a tropical forest environment (Maridet and Ni, 2013; Li et al., 2016; Li and Ni, 2016; Ni et al., 2016). The new cricetid reported here comes from two sites (19 and 20) near Caijiachong village. Stratigraphically the two sites are correlated to a layer higher than the lower Oligocene fossil layer of Lijiawa locality, but the two sites also yield other early Oligocene fossils such as Cricetops auster.
The peculiar brachydont lophodont teeth of the new species reported here resembles another family: Gliridae Thomas, 1897, the family of extant dormice. Most extinct glirid rodents are recorded in Europe where they first appear in the lower Eocene of France (Thaler, 1966). The oldest Asian glirid, Glirulus zhoui Wu et al., 2016, is known in the upper Oligocene of China (Wu et al., 2016). The occurrences of glirids in Asia remain rare. The occlusal pattern of glirid teeth is characterized by multiple parallel lophodont crests. In the extant genus Graphiurus Smuts, 1832, these extra crests, especially in upper molars, can be very irregular in shape and orientation, with various spurs, and we also observed this morphology in the new cricetid reported here. Most of the extant glirids are arboreal and maintain a diet mostly composed of fruits and seeds. The molecular analyses (Blanga-Kanfi et al., 2009; Churakov et al., 2010) clearly indicate that Cricetidae s.l. and Gliridae are not closely related among Rodentia. As a result, these two families are referred to two different suborders of rodents (Blanga-Kanfi et al., 2009; Churakov et al., 2010). These suborders have recently been named Supramyomorpha, for the mouse-related clade including Cricetidae; and Eusciurida, for the squirrel-related clade including Gliridae (Flynn et al., 2019). The similarity between the new cricetid and glirids could be the result of convergent evolution of which controlling factors remain to be identified.
FIGURE 1.
Location of the Caijiachong mammalian fossil sites in China. Caecocricetodon yani gen. et sp. nov. fossils were discovered from the highest fossiliferous layer (marked with black arrowhead).

Dental terminology used in this study is after Maridet and Ni (2013). The upper molar paracone spur sensu Maridet and Ni (2013) is strong in the new species, so it is named distal arm of paracone in the descriptions below.
Institutional Abbreviations––IVPP, Institute of Vertebrate Paleontology and Paleoanthropology of the Chinese Academy of Sciences, Beijing, China.
Material and Methods
Fossiliferous sediments have been sampled from the lower Oligocene site 19 and 20 near the Caijiachong Village, Qujing County of Yunnan Province, China (Fig. 1). All specimens were collected by double screen-washing, the finer screen being 0.2 mm. The specimens are stored in the collections of IVPP. The specimen numbers include IVPP V 26103 and V 26104.1 to 26104.333.
The terminology used to score the characters in the phylogenetic analysis and describe the specimens follows Maridet and Ni (2013). Specimens were measured under the ZEN Pro 2012 system with a Zeiss stereo-microscope (Discovery V20, Carl Zeiss Microscopy GmbH, Jena, Germany), and were calibrated from digital calipers. The specimen images were produced using the 225 kV micro-CT facility at the Key Laboratory of Vertebrate Evolution and Human Origins of the Chinese Academy of Sciences. All these specimens were CT scanned with a beam energy of 140 kV and a flux of 100 µA at a detector resolution of 6.7 µm per pixel using a 360° rotation with a step size of 0.5° and an unfiltered aluminum reflection target. Three-dimensional reconstructions were produced in the VGStudio Max software 2.2 ( www.volumegraphics.com).
SYSTEMATIC PALEONTOLOGY
Order RODENTIA Bowdich, 1821
Family CRICETIDAE Fischer von Waldheim, 1817
Genus CAECOCRICETODON, gen. nov.
Type Species––Caecocricetodon yani, sp. nov.
Included Species—The type species only.
Occurrence—Lower Oligocene, Yunnan Province, China.
Etymology—From the prefix ‘Caeco’, the Latin ‘caecus’ meaning ‘blind’ or ‘invisible’ and the genus Cricetodon indicating a primitive morphology within the cricetid family. Caeco refers to the difficulty of distinguishing the classic cricetid-pattern of the molars due the multiple additional crests and spurs on the occlusal surface.
Diagnosis—Medium size cricetid with almost completely lophodont and low crowned cheek teeth. The mesolophs(ids) are variable and bear lots of extra crests or spurs. The mesostyle joins the distal arm of paracone and metacone ridge to form a labial cingulum in upper molars. The metalophulid is absent on m1, but complete on m2 and m3. The distal arms of protoconid and metaconid are distinct in lower molars. The metaconid ridge is long and forms the lingual cingulid in all lower molars.
CAECOCRICETODON YANI, sp. nov.
(Figs. 2–4)
Holotype—IVPP V 26103: right M1, 1.45 × 1.07 mm (length × width).
Hypodigm—IVPP V 26014.1–V 26014.63, M1, mean size: 1.43 × 1.09 mm; V 26014.64–V 26014.127, M2, mean size: 1.37 × 1.20 mm; V 26014.128–V 26014.163, M3, mean size: 1.21 × 1.17 mm; V 26014.164–V 26014.221, m1, mean size: 1.37 × 1.01 mm; V 26014.222–V 26014.280, m2, mean size: 1.42 × 1.11 mm; V 26014.281–V 26014.333, m3, mean size: 1.47 × 1.09 mm.
Etymology—Named after Mr. Zhou-Liang Yan in appreciation for his assistance in the fieldwork.
Diagnosis—As for the genus.
Type Locality—Caijiachong, Qujing, Yunnan Province, China; layer 19.
Measurements—see Table 1 and Supplemental Data 1 (ujvp_a_1917587_sm5294.docx).
Description
The dental morphology of this new species is very complex with noticeable variability. The description below focuses on the general pattern of the teeth, location and shape of the cusp (id)s and main crests (Figs. 3, 4). For all teeth described, numerous additional small crests or spurs are present on top of the general pattern. The morphological variation of those small crests and spurs seems unpredictable from one tooth to another and produces a variety of connections, making each tooth morphologically unique.
Upper Dentition(Figs. 2A-I, 3)––M1 is trapezoidal and with a slightly concave occlusal surface. The single anterocone is usually small and located on the labial side of the anteroloph, easier to observe in some specimens (e.g., Fig. 3A1, A5). The anteroloph originates from the lingual side of the tooth extending anterolabially but not reaching the labial border. It is incomplete in some specimens (such as the holotype). The anterolophule presents both labially and lingually. It connects to the anteroloph and mesial protolophule (also called protolophule I). However, in some specimens, the anterolophule is absent. The anteroloph can also connect to the protolophule through the end of the labial side of the anteroloph. Both protolophules, mesial and distal, are parallel to the anteroloph. As opposed to the distal protolophule (protolophule II), the mesial protolophule is complete and connects to the anteroloph through the anterolophule, the labial side of the anteroloph or both of them. The distal protolophule (protolophule II) is frequently interrupted, which results in the valley between the two protolophules being connected to the mesosinus. The protoconule is distinct and lies on the mesial protolophule (protolophule I) in some specimens. The distal arm of the protocone is sometimes elongated, but never reaches the entoloph. The paracone is slightly anterior to the protocone, it is the strongest cusp with a spear shape and the distal arm of the paracone usually extends backward and connects with the mesoloph or the mesostyle. The entoloph is robust and posterolingually oriented. The entomesoloph is absent. However, there are two or three mesolophs in the mesosinusid. The mesolophs display strong variations in their length, orientation and division. They bear several spurs, which sometimes connect to other main lophs. The mesostyle spurs join with the mesolophs on the labial side of tooth. The mesostyle is distinct and usually forms a labial cingulum which closes the mesosinus. The metalophule connects to the middle part of hypocone and extends transversely towards the metacone, sometimes being slightly inclined. The metacone ridge can be well developed. There is an extra loph developed from the middle of the posteroloph, similar to the hypoconid hind arm in lower molars. It extends in the posterosinus and reaches the labial border in some specimens.
M2 is a little larger than M1. The occlusal view of M2 is rectangular, with the mesial part sometimes slightly wider than the distal part. The anteroloph and protolophules are all transverse. The anterocone is weak and only a tiny cusp can be seen on the labial side of the anteroloph. The anterolophule is located in the lingual side of the tooth and connects to the labial side of the protocone. The anterosinus is always opened labially. As opposed to M1, the mesial protolophule connects with the mesial part of protocone and the paracone. The distal protolophule is normally incomplete. It develops from the middle part of protocone and extends posterolabially. The distal protolophule displays a noticeable variability. It can be interrupted in the middle or bears some spurs in the valley between the two protolophules. The protocone and paracone are much stronger than on M1. The distal arm of protocone is more developed and elongated posterolabially. In some specimens, the entomesoloph is present in the middle part of the entoloph and connects with the distal arm of the protocone, forming a round fossette. The rest of the M2 has two or three mesolophs with a strong variability as on M1. As on M1, there is also an extra crest developed from the posteroloph and extending in the posterosinus.
M3 is subtriangular with a strongly reduced lingual side distally. The anteroloph and anterolophule are similar to M2. The anterosinus is always open in its labial side. Proportionally, the transverse anteroloph is longer than on M2. But, the protolophules, metalophule and posteroloph are much thinner than those of M1 and M2. Both of the protolophules and metalophule are more sinuous than on M1 and M2. The paracone is the only distinct cusp on M3. The other cusps are weak and crest-like. The protocone is combined with the entoloph and forms a round lingual wall. The entomesoloph is absent. The mesolophs are slightly thinner than those on M1 and M2, but still with a strong variability. The labial cingulum is weak but generally complete. It connects to the distal arm of the paracone mesially and the posteroloph labially. The extra crest in the posterosinus is rare and present only in some specimens. The posteroloph is no longer transverse; instead, it forms a round distal wall and connects with the metalophule in the labial side.
Lower Dentition (Figs. 2J-R, 4)––The mesial part of m1 is much narrower than the distal part. The anteroconid is weak or absent. When present, it is close to the protoconid and even connects with protoconid through anterolophulid in some specimens. The metalophulid is absent. Two mesiodistal crests in the middle of the mesial part of the tooth are considered as the distal arms of protoconid and metaconid, respectively. They connect to each other mesially, occasionally with some tiny spurs distally. The metaconid ridge and the ectolophid are complete, parallel to each other and slightly oblique, forming the lingual cingulid. Sometimes, the metaconid ridge is not connected with the entoconid, whereas there is a weak and low connection between the ectolophid and the hypoconid. The ectomesolophid is absent. As for the mesolophs in upper molars, mesolophids also have a noticeable variability. Two weak transverse mesolophids can be observed. They originate from the ectolophid towards the lingual side and have spurs or connect to other crests forming a unique pattern for each tooth. Both the hypoconid and the entoconid are well developed on m1. The hypolophulid is complete and connects with the mesial part of these two cusps. The distal arm of the hypoconid is variable and enclosed in a fossette delimited by the hypolophulid and the posterolophid.
The m2 is slightly longer than m1, but wider in its mesial part. The anterolophid is well developed and the anteroconid is not distinct. Labially, the anterolophulid connects with the anterolophid and the transverse metalophulid I. Unlike m1, the metalophulid is always complete and slightly bent backward. The distal arm of the protoconid is transverse and slightly oblique (mesiodistal on m1). It disconnects to the distal arm of the metaconid. The distal arm of the metaconid is similar to that of m1. It could be either weakly or well developed and originates from the metalophulid. The rest of the distal part of m2 is similar to m1. The mesolophids are variable in the central valley, with lots of extra crests or spurs. The well-developed hypolophulid and posterolophid enclose the posterosinusid in some cases. The distal arm of hypoconid starts from the middle of posterolophid and extends to the lingual side along the sinusid.
The m3 is similar to the m2 in size. The distal part of m3 is narrower than m2. The only difference between m2 and m3 is in their distal parts. The hypolophulid is noticeably shorter than the metalophulid, whereas they are of equivalent length on m2. The protoconid, metaconid and hypoconid are developed as on m1 and m2, but the entoconid is much weaker. The posterolophid is strongly reduced in both lingual and labial sides and tends to form a round wall distally. The posterosinusid is usually closed and the distal arm of hypoconid is weaker and variable.
FIGURE 2.
Upper and lower teeth of Caecocricetodon yani, gen. et sp. nov.: A, holotype, V 26103, right M1; B, V 26104.1, left M1; C, V 26104.2, right M1; D, V 26104.64, right M2; E, V 26104.65, left M2; F, V 26104.66, left M2; G, V 26104.128, left M3; H, V 26104.129, right M3; I, V 26104.130, right M3; J, V 26104.164, left m1; K, V 26104.165, right m1; L, V 26104.166, left m1; M, V 26104.222, left m2; N, V 26104.223, right m2; O, V 26104.224, left m2; P, V 26104.281, left m3; Q, V 26104.282, left m3; R, V 26104.283, left m3; B, E, F, G, K, N are reversed.

FIGURE 3.
Colorized pattern for upper teeth of Caecocricetodon yani, gen. et sp. nov. A1, V 26104.44, right M1; A2, V 26104.51, left M1; A3, V 26104.12, right M1; A4, V 26104.50, left M1; A5, V 26104.45, right M1; A6, V 26104.53, left M1; A7, V 26104.13, left M1; A8, V 26104.10, left M1; A9, V 26104.47, left M1; A10, V 26104.54, right M1; A11, V 26104.19, left M1; A12, V 26104.33, right M1; A13, V 26104.48, right M1; A14, V 26104.8, right M1; A15, V 26104.16, right M1; A16, V 26104.39, left M1; B1, V 26104.74, left M2; B2, V 26104.69, left M2; B3, V 26104.77, left M2; B4, V 26104.81, right M2; B5, V 26104.75, left M2; B6, V 26164.70, left M2; B7, V 26104.79, right M2; B8, V 26104.83, left M2; B9, V 26104.85, right M2; C1, V 26104.139, right M3; C2, V 26104.141, right M3; C3, V 26104.142, right M3; C4, V 26104.144, left M3; C5, V 26104.145, right M3; C6, V 26104.134, right M3; A2, A4, A6, A7, A8, A9, A11, A16, B1, B2, B3, B5, B6, B8, and C4 are reversed. Color reference: blue, main lophs including anteroloph, mesial and distal protolophules, metalophule and posteroloph; green, red, orange, sky blue, purple and brown, mesolophs; yellow, labial cingulum.

FIGURE 4.
Colorized pattern for lower teeth of Caecocricetodon yani, gen.et sp. nov. A1, V 26104.169, right m1; A2, V 26104.170, left m1; A3, V 26104.172, right m1; A4, V 26104.174, right m1; A5, V 26104.175, left m1; B1, V 26104.226, right m2; B2, V 26104.230, right m2; B3, V 26104.233, left m2; B4, V 26104.236, right m2; B5, V 26104.242, left m2; B6, V 26104.246, left m2; C1, V 26104.285, right m3; C2, V 26104.288, left m3; C3, V 26104.297, left m3; C4, V 26104.301, left m3; A1, A3, A4, B1, B2, B4, and C1 are reversed. Color reference: blue, including lingual cingulid, ectolophid, hypolophulid and posterolophid; green, distal arm of metaconid; purple, distal arm of protoconid; orange, anterolophid; yellow and red, mesolophids.

TABLE 1.
Molar measurements of Caecocricetodon yani, sp. nov. (in mm). Abbreviations: CV, coefficient of variation; Max, maximal value; Min, minimal value; N, number of specimens; StD, standard deviation.

PHYLOGENETIC ANALYSIS
Our phylogenetic analysis is based on an updated version of the data matrix initially published by Maridet and Ni (2013). We combined two characters from their matrix (19: M1, presence of anterocone; 20: M1, size different between the lingual and labial parts of the divided anterocone) into one character with four states to describe the different type of anterocone: 0, absent; 1, simple, undivided; 2, divided, size subequal; 3, divided, size different. Considering their character 19 is unordered but 20 is ordered, here we use step-matrix method to order this new character. From 0 to 1 by one step; from 0 to 2 or 3 by two steps; from 1 to 0, 2 or 3 by one step; from 2(3) to 0 by two steps; from 2(3) to 1 or 3(2) by one step. Four new unordered characters are added into the new matrix for describing the presence of mesoloph(id) and ectomesolophid in cheek teeth (see Supplemental Data 2 (ujvp_a_1917587_sm5294.docx), 3 (ujvp_a_1917587_sm5294.docx)). Compared to the initial analysis (Maridet and Ni, 2013), in order to focus on the relationships between Paleogene stem cricetids, five Neogene taxa are excluded in the present analysis: Deperetomys intermedius de Bruijn, Ünay, Sarac and Klein Hofmeijer, 1987, Enginia gertcheki de Bruijn and von Koenigswald, 1994, Meteamys alpani de Bruijn, Ünay, van den Hoek Ostende and Saraç, 1992, Mirabella tuberosa de Bruijn, Ünay, Sarac and Klein Hofmeijer, 1987 and Muhsinia steffensi de Bruijn, Ünay, van den Hoek Ostende and Saraç, 1992.
Parsimony analysis was performed by PAUP* 4.0a167 (Swofford, 1998), with heuristic search, TBR branch-swapping, and random addition sequence for 1000 replicates (see Supplemental Data 4 (ujvp_a_1917587_sm5294.docx), 5 (ujvp_a_1917587_sm5294.docx)). Our strict consensus tree (Fig. 5) is generated by six equally most parsimonious trees (tree length = 234, CI = 0.385, RI = 0.599). The relationships between the basal clades are well resolved in our analysis. Caecocricetodon forms a monophyletic group with Paracricetodon Schaub, 1925 and Trakymys Ünay-Bayraktar, 1989. Additionally, we used the age of each taxon to do the Bayesian analysis by Tip Dating method (see Supplemental Data 6 (ujvp_a_1917587_sm5294.docx), 7 (ujvp_a_1917587_sm5294.docx)). The analysis was performed in MrBayes 3.2 (Ronquist et al., 2012). The result of the basal group is the same as in the parsimony analysis (see Supplemental Data 8 (ujvp_a_1917587_sm5294.docx)). Although the relationships between the derived taxa are still unresolved, the present analyses may provide some guidelines for the future work.
FIGURE 5.
Result of the phylogenetic analysis, with the strict consensus tree of six most parsimonious trees. Scale bar equals 8 character changes.

The monophyly of Caeocricetodon and Paracricetodontinae Mein and Freudenthal, 1971 are well supported in our analysis, and the new genus represents the most basal taxon of the Paracricetodontinae clade. Here we therefore propose to refer Caecocricetodon to the subfamily Paracricetodontinae. Meanwhile, Pappocricetodon recunensis (the type species of the genus) is now grouped with Caecocricetodon, Paracricetodon and Trakymys, though Pappocricetodon still remains polyphyletic. Caenocricetodon might highlight a new phylogenetic relationship of Pappocricetodon with Paracricetodon and Trakymys that was not detected in previous phylogenetic analysis (Gomes Rodrigues et al. 2010; Maridet and Ni, 2013).
DISCUSSION
Caecocricetodon differs from any stem or crown cricetids known so far by the peculiar morphology of its cheek teeth. Both upper and lower molars are almost completely lophodont, with low crown, and a complicated pattern due to numerous and very variable crests and spurs. Ulaancricetodon badamae Daxner-Höck, 2000, from the early Oligocene of northern Asia, shares with Caecocricetodon, but to a lesser extent, a less lophodont, low crown pattern. Caecocricetodon presents morphology superficially similar to that of glirids, in which the cheek teeth all have a low crown and a complex lophodont pattern. The combination of numerous crests with complex spurs is characteristic for the living and fossil glirids, although some extant glirids (e.g., Graphiurus lorraineus Dollman, 1910) or extinct ones (e.g., Glamys umbriae Freudenthal, 2004) present a less complex occlusal pattern. However, except for this complex pattern, Caecocricetodon retains the morphological characteristics of cricetids s.l. with distinct differences in the shape of molars and the orientation of the main crests(ids) from glirids. Upper and lower first molars are indeed more elongated (as opposed to a square shape in glirids) and display no anterior contact surface which indicates the absence of P4 and p4. The screen-washing with the lower mesh size of 0.2 mm confirms the absence of P4 and p4 in sampled sediments. Additionally, both upper and lower first molars possess respectively an anterocone and an anteroconid which is never observed in glirids. Upper and lower molars all display respectively an entoloph and an ectolophid, while the transversal crest of these joining the pair of anterior and posterior cusp(id)s is also never observed in glirids (Fig. 6).
FIGURE 6.
Comparison of molars among the Early Oligocene rodents. Eucricetodon caducus Shevyreva, 1967 (Cricetidae): A1–A3, M1–M3, A4–A6, m1–m3; Caecocricetodon yani, gen. et sp. nov. (Cricetidae): B1–B3, M1–M3, B4–B6, m1–m3; Microdyromys misonnei Vianey-Liaud, 1994 (Gliridae): C1–C3, M1–M3, C4–C6, m1–m3.

Like extant glirids (Fig. 6), but different from the other cricetids from the same area (such as Cricetops and Paracricetops Maridet and Ni, 2013; Li et al., 2016), Caecocricetodon has a low tooth crown with complex and lophodont tooth cusp-ridge pattern. This complex tooth pattern must indicate an adaptive pattern totally different from all the other early Oligocene cricetids, and probably implies a very low or inexistent abrasive component in the diet. Most extant glirids are arboreal (Novak, 1999). Even the most terrestrial species, such as Eliomys Wagner, 1840, Graphiurus, and Myomimus Ognev, 1924, live in a forest habitat (Novak, 1999). Unlike hypsodont mammals, which usually live in an open environment and are adapted to grazing grass associated with abrasive materials such as dust and sand (Kovalevsky, 1873; Osborn, 1910; Matthew, 1926; Fortelius and Solounias, 2000), low-crowned glirids are omnivores, feeding preferentially on fruit, nuts, eggs, small invertebrates, and more rarely other small vertebrates (Vaughan et al., 2000). A similar environment (with low dust and sand covering) and similar diet can be hypothesized for Caecocricetodon, given its dental pattern is very similar to those of dormice. This interpretation for the paleoenvironment of Caecocricetodon is consistent with the other small mammals previously described from the same locality, which also support an environment dominated by forest vegetation (e.g., Maridet and Ni, 2013; Li et al., 2016; Ni et al., 2016).
The highly complex occlusal surface with numerous crests, complex ridge connections and their sinuous shape in Caecocricetodon is unique. Famoso et al. (2013) studied the implication of the occlusal enamel complexity in ungulates. As part of the morphological complexity, the occlusal enamel bands lead to resistance for grinding against the opposing tooth (upper to lower). Although the enamel bands of ungulates are not really equivalent to the crests of our specimens, a similar mechanical advantage can be hypothesized. Also, part of the morphological complexity, cingulums and cingulids are classically thought to be related to protecting gingiva (Kermack et al., 1968; Hillson, 2005). However, more recently, Anderson et al. (2011) used 3D models to analyze the effect of cingulums and cingulids on strain patterns in tooth enamel. They implied that the development of the lower molar lingual cingulid and the upper molar labial cingulum not only provides protection, but also has a possible functional advantage related to the reduction of strain. The extra low crests observed in our specimens may have the same function as the cingulum and cingulid: to reduce the strains on the main crests. This better resistance and reduced strain of teeth could be an adaptation to hard, but not abrasive, components of diet such as a higher proportion of seeds, fruit pits, or chitin exoskeletons of small arthropods, as opposed to other cricetids s.l.
During the Eocene–Oligocene transition, northern and central Asia may have undergone a significant aridification compared to the rest of Eurasia (Ramstein et al., 1997). As a result, in northern Asia, the climatic change led to a strong turnover where the late Eocene perissodactyl-dominant fauna was replaced by a rodent/lagomorph-dominant fauna at the beginning of the Oligocene, implying a drastic opening of landscapes (Meng and McKenna, 1998; Sun et al., 2014). By contrast, in southern Asia, the discovery of Ptilocercus (tree shrew) and diverse primates indicate that the tropical forest environment was still present in lower Oligocene (Li and Ni, 2016; Ni et al., 2016). Likewise, in Europe based on fossil plants, the mixed deciduous evergreen forests indicate a warm seasonal climate and the preservation of partly wet and closed vegetation at the beginning of the Oligocene (Collinson and Hooker, 1987; Collinson, 1992; Prothero, 1994).
Fossil glirids are abundant in Europe, but not present in the Asian mammalian fossil records until the late Oligocene (Maridet et al., 2011). Caecocricetodon, with their peculiar dental morphology, probably convergently evolved the dental adaptation morphology of Gliridae, and occupied an ecological niche similar to that of glirids in Europe at the same time. Based on the ecology of extant glirids, and in accordance with both the paleoenvironments of southern Asia and Europe at the beginning of the Oligocene, we propose that this ecological niche might have been linked to the conservation of partly wet and closed landscapes and the specific associated diet.
ACKNOWLEDGMENTS
We are grateful to Y.-M. Hou for CT scanning. G.-Z. Wang, R. Li and C.-M. Zhu sorted the concentrates of the screen washing. This project has been supported by the Strategic Priority Research Program of Chinese Academy of Sciences (XDA20070203-XDB26030300-XDA19050100, to X.N.), the National Natural Science Foundation of China (41888101-41988101-41625005, to X.N.), and two Swiss National Science Foundation (n°200021_162359 to X.L. and O.M.; n°CKSP_190584 to O.M.). We are also thankful to L. L. Jacobs, L. J. Flynn and Y. Kimura for helpful comments on successive versions of this paper.
LITERATURE CITED
Notes
[1] Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/ujvp.
[2] SUPPLEMENTAL DATA—Supplemental materials are available for this article for free at www.tandfonline.com/UJVP