Although investigators have compared radio-transmitter attachment devices and their likelihood of failure before the end of a study, few have directly evaluated the harness materials and fastening methods that are to be shed by a bird after the research period is over. We compared the likelihood of effective detachment after transmitter life of four harness materials (7-mm- and 9-mm-wide polyester ribbon tape and polyester-coated rubber elastic) and three fastening methods (polyester thread, cotton thread, and Gorilla Super Glue™) using dummy transmitters exposed to the elements for >1.5 years. Both polyester ribbon and polyester-coated rubber elastic materials resulted in similar physical wear and remained intact for longer than a typical field seasonal, but fastening harnesses using Gorilla Super Glue™ resulted in the earliest and most consistent harness failure. Polyester ribbon material and glue fastening resulted in the earliest failure; mean failure time for 7-mm- and 9-mm-wide polyester ribbon tape with glue fastening was 408 days ± 30 SE, and 249 days ± 29 SE, respectively. Failure times for both 7-mm- and 9-mm-wide polyester-coated rubber elastic and Gorilla Super Glue™ fastening treatments were in excess of one year (438 days ± 14 SE and 438 days ± 13 SE, respectively). All harnesses with sewn thread fastening treatments lasted a minimum mean of 456 days, and in the case of both 7-mm-wide polyester ribbon and polyester-coated rubber elastic, neither treatment ever failed over the period of study. Results suggest that using Gorilla Super Glue™ as a fastener maximized the likelihood of eventual harness failure, whereas transmitters fastened via sewing showed minimal signs of wear and were unlikely to be shed by a bird during a period of time less than two years. Additional experimental studies are warranted to examine alternative harness material types, fastening methods, and harness styles to maximize the potential of successful radio transmitter shedding.