Incongruence of morphological determinations and DNA barcode sequences: a case study in Cinnamomum (Lauraceae)

In the course of molecular systematic studies of Lauraceae we received a sample of a plant cultivated under the name Cinnamomum porrectum in the Botanical Garden Munchen-Nymphenburg. Preliminary determinations, both morphologically based on the Flora of China (Li & al. 2008) and by chloroplast sequences (psbA-trnH spacer, trnK intron including matK gene, trnL intron, trnL-trnF spacer and trnQ-rps16 spacer) obtained by Sanger sequencing suggested that it was C. camphora, still the plant looked different from other individuals of C. camphora cultivated in the botanical gardens of Berlin, Hamburg, Mainz, Munich and Oldenburg. Attempts to sequence the more informative nuclear internal transcribed spacer repeatedly led to mixed signals. We therefore used Illumina sequencing on a set of pre-amplified molecular markers (ITS, trnK 3′ and 5′ intron, trnL intron, and the intergenic spacers psbA-trnH, trnL-trnF, as well as parts of the trnQ-rps16 spacer), and downloaded available sequences of C. camphora and C. parthenoxylon from GenBank for comparison. Considerable differences were found among these sequences, but the haplotype groups do not coincide with the current species determinations. Particularly the internal transcribed spacer sequences are rather diverse, suggesting possible misidentifications, contaminations, and/or a common gene pool that is larger than anticipated. Concerning the plant in question, our results suggest that it may be a hybrid, with C. camphora as the maternal and another species, possibly C. parthenoxylon, as the paternal parent.Citation: Rohwer J. G., Trofimov D., Mayland-Quellhorst E. & Albach D. 2019: Incongruence of morphological determinations and DNA barcode sequences: a case study in Cinnamomum (Lauraceae). – Willdenowia 49: 383–400. doi: https://doi.org/10.3372/wi.49.49309Version of record first published online on 4 December 2019 ahead of inclusion in December 2019 issue.


Introduction
In the Lauraceae, intraspecific hybrids are well known, especially among different varieties of the avocado, Persea americana Mill. (e.g. Furnier & al. 1990). Interspecific hybrids have been described between several species of P. subg. Persea (P. americana, P. drymifolia Schltdl. & Cham., P. floccosa Mez, P. nubigena L. O. Williams, P. steyermarkii C. K. Allen), but some of these "species" (P. drymifolia, P. nubigena) have been treated as varieties of P. americana by Kopp (1966), and all of them appeared to be part of P. americana in a wider sense in the analysis of Furnier & al. (1990). Apart from that, hybridization frequently has been invoked as an ad hoc explanation for occasional morphologically intermediate specimens, e.g. by Kopp (1966) and Rohwer (1993). At least to our knowledge, however, there is no unequivocal evidence of interspecific hybridization in Lauraceae, apart from the cases involving P. americana and its closest relatives.
During a molecular systematic investigation on the genus Cinnamomum Schaeff. (Rohde & al. 2017), we received a sample of a plant cultivated in the Botanical Garden München-Nymphenburg (Munich), Germany, with the accession number 2006/1425 (Fig. 1A,  B). Originally, the plant had been identified as C. porrectum (Roxb.) Kosterm., a synonym of C. parthenoxylon (Jack) Meisn. We tried to verify this determination based on the vegetative plant material received, as the individual has not yet undergone flowering. Comparison with the key and the descriptions in the Flora of China (Li & al. 2008) suggested C. camphora (L.) J. Presl or perhaps C. micranthum (Hayata) Hayata as the most likely determination. However, many of the leaves of the specimen in question were slightly larger than described for those two species, up to 15 cm long and 7 cm wide, with petioles up to 4 cm, compared to a maximum of 10 × 6 cm described for C. micranthum and 12 × 5.5 cm described for C. camphora, both with 3 cm petioles. In addition, the leaves of the specimen in question were elliptic to lanceolate-elliptic, usually with an acute to attenuate base, compared to mostly ovate-elliptic leaves with a broadly cuneate to rounded base in C. micranthum and C. camphora, at least on flowering branches. As a result, the general aspect of the plant in question is somewhat different from the form of C. camphora that is Commonly applied chloroplast DNA barcode markers (psbA-trnH intergenic spacer, trnK intron including the matK gene, trnL-trnF region; Hollingsworth & al. 2011;Liu & al. 2017) and the less frequently used trnQ-rps16 intergenic spacer obtained by Sanger sequencing likewise confirmed C. camphora. Attempts to sequence the more informative nuclear ribosomal internal transcribed spacer region (ITS), however, usually resulted in mixed sequences. We therefore applied high-throughput (Illumina) sequencing to a set of pre-amplified molecular markers including ITS, in order to identify the secondary signal in ITS and to investigate if there was a secondary signal in the chloroplast markers as well.

Material and methods
Material originally determined as Cinnamomum porrectum has been collected by Günter Gerlach in the greenhouse of the Botanical Garden München-Nymphenburg in November 2010 and on 27 October 2015. For comparison, material of C. camphora has been collected by JGR in the Botanical Garden of Hamburg (Fig. 1C, D). Voucher specimens for each plant are preserved in the Herbarium Hamburgense (HBG).
Total genomic DNA was extracted from silica gel dried leaves of both specimens with the "innuPREP Plant DNA Kit" (Analytik Jena, Germany) according the manufactur-er's protocol, with modifications as in Rohwer & Rudolph (2005) and Trofimov & al. (2016). The molecular markers and primers used for this study are listed in Table 1. In the amplifications of the ITS region, 10 % dimethyl-sulfoxide (DMSO) was added to the reaction mix, as previously described by Rohwer & al. (2009), in order to minimize problems with secondary structures caused by the high GC content of the ribosomal DNA in Lauraceae. The PCR products were purified by degradation of single stranded DNA and proteins with FastAP thermosensitive alkaline phosphatase and exonuclease I (Thermo Scientific), both according to manufacturers' instructions.
Reactions for Sanger sequencing and sequence analysis on a 3500 Genetic Analyzer capillary sequencer (Thermo Fisher Scientific, Waltham, USA) were performed as previously described (Rohwer & al. 2009(Rohwer & al. , 2014. For high-throughput sequencing, PCR products covering the ITS region, the trnK 5′ and 3′ intron regions, the trnL intron, the trnL-trnF spacer and the beginning and end of the trnQ-rps16 spacer were sent to a sequence provider (LGC Genomics, Berlin, Germany). Multiplexed pools were built with Illumina MiSeq V3 chemistry including a normalizing step and sequenced to 300 bp paired end sequences with the aim of 10 000 sequences per specimen and locus. We received files in a first step demultiplexed to separate individuals, with the barcode indices by LGC Genomics (Berlin). These files were parsed through several steps of a semi-automated script-based pipeline to obtain multiple alignments,  Taberlet & al. (1991) trnL-d R 5′-GGGGATAGAGGGACTTGAAC-3′ Taberlet & al. (1991) trnL-e F 5′-GGTTCAAGTCCCTCTATCCC-3′ Taberlet & al. (1991) trnF-f R 5′-ATTTGAACTGGTGACACGAG-3′ Taberlet & al. (1991) trnQ-rps16     which were then inspected manually. The first part of the pipeline deals with the raw sequence data and performs a quality control, merges paired end reads and in a second step demultiplexes the locus data for every individual. For the first step of part one, we used bbduk.sh (Bushnell & al. 2017) to quality filter and trim the reads for adapters (Trueseq-PE). Parts with a quality lower than phred 10 were removed (settings: qtrim=r trimq=10 ktrim=r k=25 mink=11 hdist=1 tbo tpe). The merging of the paired end reads was done by bbmerge.sh (Bushnell & al. 2017; settings: efilter=6 pfilter=0.00002). The third step of manipulating the raw sequence data was demultiplexing the locus data in the merged and unmerged fastq files with seal. sh (Bushnell & al. 2017), using a list of primer sequences. The second part of the pipeline sorts and streamlines the data with CAP3 (Huang & Madan 1999) to produce overlapping assemblies and multiple sequence alignments of CAP3 consensus sequences with MAFFT (Katoh & Stand ley 2013). As the cap3 software is not capable of multithreading we used the free GNU parallel software (Tange 2011) to compute many CAP3 assemblies side by side on a multi-core system (cap3 settings: -p 99 -g 100 -t 500 -f 2). Consensus sequences of 90 % similarity were extracted with a python script using the Ace.parser module (settings: threshold=0.9, ambiguous="N", require_ multiple=10) contained in Biopython (Cock & al., 2009), aligned with MAFFT (settings: -ep 0 -genafpair -maxiterate 1000 -adjustdirectionaccurately) and inspected visually. Sequence variants with a frequency of less than 5 % were omitted as likely PCR or sequencing errors. For comparison, sequences of Cinnamomum camphora and C. parthenoxylon covering at least a substantial part of the investigated genome regions were downloaded from GenBank (https://www.ncbi.nlm.nih.gov/genbank/, accessed in March 2019), if available. Among them were seven complete chloroplast genome sequences (six of C. camphora, one of C. parthenoxylon) from which we extracted the respective chloroplast regions. These sequences were used as reference sequences for the chloroplast data. Accession numbers of all sequences are listed in Table 2. Sequences were aligned in Sequencher 4.8 (Gene Codes Corporation) or in MEGA 6 (Tamura & al. 2013). If a sequence deviated from most others in the first or the last 30 base pairs, these were deleted, in order to avoid possible primer or sequencing artefacts. Two micro-inversions in the psbA-trnH spacer sequences, of eight and five base pairs, respectively, were reversed and complemented in the alignments.
If more than two haplotypes were found per molecular marker, haplotype networks were constructed using the Integer Neighbor Joining algorithm (IntNJ) implemented in POPART (Leigh & Bryant 2015). Because the algorithm cannot deal with too many undefined character states, either shorter sequences or most non-overlapping alignment positions (or both) had to be excluded from the haplotype analyses. Their results therefore represent less than the entire range of variation among the sequences.
In order to detect possible misidentifications or contaminations, sequences diverging from the most frequent haplotypes were subjected to a BLAST search (Basic Local Alignment Search Tool, https:// blast.ncbi.nlm.nih.gov/Blast.cgi). In addition, we inserted the ITS sequences into a subset of the ITS data matrix of Rohde & al. (2017) and performed maximum likelihood analyses of the entire ITS region and the separate ITS-1 and ITS-2 regions in MEGA 6, with taxa of the Persea group (Machilus grijsii Hance, Phoebe sheareri (Hemsl.) Gamble and Persea americana) as outgroup. Branch support was estimated by bootstrapping with 500 replicates.

Results
An examination of the leaf spectrum of the largest Cinnamomum camphora tree cultivated in the greenhouse of the Botanical Garden of Hamburg (Fig. 1C, D) revealed that the range of variation in leaf shape and size is much larger even in a single individual than indicated in the Flora of China (Li & al. 2008). On non-flowering branches we found leaves up to 19.5 cm long and 10 cm wide, with petioles up to 5 cm long. The length:width ratio of the leaf blades on this tree ranged from 1.5:1 to 3.5:1, and the leaf bases varied from rounded via obtuse, acute and cuneate to narrowly attenuate.
The complete chloroplast genome sequences can be sorted into two groups of highly similar sequences. Chloroplast (cp) group #1 consists of the sequences MF156716, MG021326 and NC035882 (all Cinnamomum camphora), cp group #2 of LC228240, MF421523 and MH050970 (C. camphora), plus MH050871 (C. parthenoxylon). The two groups differ considerably, by 10 substitutions in the psbA-trnH spacer, 13 in the trnK intron, one in the trnL intron, one in the trnL-trnF spacer, and nine substitutions plus two insertion/deletion events (indels) in the trnQ-rps16 spacer. Within the groups there are only minor differences. In cp group #1, the matK sequences of MF156716 and NC035882 have a duplication of a single base (A) immediately before the stop codon, making the matK transcript 21 bases longer. In cp group #2, the matK sequence of LC228240 differs by a single substitution from the other members of the group.
Most of the chloroplast DNA sequences obtained from the plant in question (the suspected hybrid) by direct Sanger sequencing (psbA-trnH spacer, trnK intron, trnL-trnF spacer, trnQ-rps16 spacer) turned out to be identical with the sequences of cp group #1. Only the trnL intron sequence agrees with cp group #2, but in this case it is the only difference between the two groups. The trnQ-rps16 sequence likewise differs by a single substitution from cp group #1, but cp group #2 differs much more in this spacer. However, there are sometimes additional differences among the shorter sequences downloaded from GenBank.
Most of the downloaded psbA-trnH sequences of Cinnamomum camphora (GU135428, HM019386, HM019387, HQ427102, KP095535, KU160277, KX509882, KX546101, KX546102, KX546103, LC435397, MF072391, MF072392, MF096903, MF096904, MF096905, MF096906, MF096907, MF096908, MF137960) agree with cp group #1, disregarding repeat length diff erences in a poly-T single nucleotide repeat. Sequence KJ686728, however, agrees with cp group #2. Four additional haplotypes are represented by one or two sequences each ( Fig. 2A). Sequences HQ415574 and KP095536 diff er by three substitutions from cp group #1, of which two are shared with cp group #2. According to a BLAST search, they are 100 % identical (in 100 % query cover) with C. che-kiangense Nakai (MF137961) and several sequences of C. burmannii (Nees & T. Nees) Blume (MF137956, MF137957, MF137958). However, many other Cinnamomum species are not much diff erent, either. GQ435461 and KX546100 diff er from cp group #1 by a single (diff erent) substitution each. GQ435461 shows 99.24 % similarity not only to cp group #1 sequences of C. camphora, but also to sequence GQ435459 of C. parthenoxylon and sequence HM019382 of C. bodinieri H. Lév. Sequence KX546100 shows 99.74 % similarity to many C. camphora sequences, but also to sequences KX546116 and KX546117 of C. longepaniculatum (Gamble) N. Chao ex H. W. Li  HQ415392, KP093546), which otherwise agree with cp group #1, except for one additional substitution in AJ966800. The sequences JQ435499 ("C. camphora") and JQ435498 ("C. parthenoxylon") diff er considerably from all other sequences. JQ435499 diff ers by 13 substitutions from cp group #1 and by 15 substitutions from cp group #2. JQ435498 diff ers by 24 substitutions from cp group #1, by 25 substitutions from cp group #2, and by an insertion and a deletion of a single nucleotide from all other sequences. Nevertheless, according to a BLAST search these deviating sequences agree 97.53 % and 95.89 % with numerous other Lauraceae, mainly Cinnamomeae, including taxa of the Neotropical Ocotea complex. The indels in JQ435498 are 15 positions apart in the coding region of the matK gene, so that the reading frame is relatively quickly restored.
In the trnL-trnF region, our new sequence of Cinnamomum parthenoxylon (MN482112) is identical with that of the plant in question (MN482111), i.e. it agrees with cp group #2 in the trnL intron and with cp group #1 in the trnL-trnF spacer. The four short trnL intron sequences (AB040090, AB040091, AB817476, KF586691) and the fi ve trnL-trnF spacer sequences (AB040080, AB040081, AF129020, KF586659, KM056312) of C. camphora downloaded from GenBank are identical with cp group #1. Apart from the complete chloroplast genomes, there are no sequences of the trnL-trnF region of C. parthenoxylon in GenBank, and no previously submitted sequences of the trnQ-rps16 intergenic spacer of any Cinnamomum species.
Sanger sequencing of the internal transcribed spacer (ITS) region was less straightforward in the plant in question. In most attempts based on the fi rst collection (from 2010) we obtained a mixed signal, in which only a part of the sequence was clearly readable, while most of it contained overlapping, non-identical chromatogram signals. We therefore requested new material from Munich in 2015, but the results were mostly the same. In two of six attempts, however, the signal was relatively clear, with a much lower secondary signal and only a few ambiguous peaks in the chromatogram, of which one remained in the consensus sequence (MF110039).
The ITS sequences submitted to GenBank as Cinnamomum camphora or as C. parthenoxylon are much more diverse than the chloroplast sequences ( Fig. 3 -5). The pairwise distances (p-distances) among the reasonably complete sequences (> 500 base pairs; 14 sequences of C. camphora, fi ve of C. parthenoxylon) are summarized in Table 3

393
Willdenowia 49 -2019 same voucher, therefore only one of them is included in Table 3. Completely identical (in their overlapping parts) are three pairs or groups of sequences: KX509822 and MF110040 (in the following called ITS group #1), KP218517, KP218518 and KX766404 (ITS group #2), as well as KP092858 and KX546421 (ITS group #3). ITS group #3 diff ers from both ITS group #1 and ITS group #2 by 11 substitutions, whereas ITS groups #1 and #2 diff er by six substitutions. Figures 3 -5 show far fewer substitutions between these groups because many of substitutions are in positions either not covered, or affected by an indel, or with an ambiguity in at least one of the additional sequences, so that they are not recognized by POPART. Sequences KX546537 and MF110039 are similar to ITS group #1 but include one ambiguous po-sition (the same in both of them), KU139826 two ambiguous positions (one of them shared with KX546537 and MF110039), which causes p-distances of zero to sequences that diff er only in these positions. In addition to the identical sequences KX509822 and MF110040 (ITS group #1), and the three sequences with ambiguous positions, the group of sequences diff ering by not more than one substitution in the ITS-1 and/or the ITS-2 region includes also the sequences KP092856, KT248576 and KX546414. All these sequences are shown as members of ITS group #1 in Fig. 3 -5.
While most ITS sequences show not more than 13 pairwise diff erences, and no diff erences at all in the 5.8S region, four of them are highly divergent. The most divergent sequence, JX242469, diff ers from the other sequences by an average of 24.4 substitutions in the ITS-1 region, 14.7 substitutions in the 5.8S region, and 39.9 substitutions in the ITS-2 region. Sequence JN115020 diff ers from the others by an average of 15.2 substitutions in the ITS-1 region, 10.9 substitutions in the 5.8S region, and 27.7 substitutions in the ITS-2 region, KP092857 diff ers by an average of 12.0 substitutions in the ITS-1 region, 2.4 in the 5.8S region, and 17.6 in the ITS-2 region, and AF272260 by 20.4 in the ITS-1 region, 2.3 in the 5.8S region, and 6.3 in the ITS-2 region. In the ITS-2 region, however, it is identical with the ITS group #1 sequences. In the 5.8S region, both AF272260 and KP092857 diff er from most sequences by only a single mutation; the much higher averages are due to the rather aberrant sequences JN115020 and JX242469. According to a BLAST search, the ITS-1 part of JX242469 agrees 99.54 % with JX242468, submitted as Cinnamomum burmannii, whereas the ITS-2 part agrees 99.38 % with C. micranthum f. kanehirae (Hayata) S. S. Ying (JX242470). All these sequences have been submitted by the same authors. The most similar C. camphora sequences are AF272260 (ITS-1, 94.42 %) and the rather short (240 bases) sequences MF096119 -MF096124 (ITS-2, 96.25 %). Sequence KP092857 agrees best (99.83 %) with several sequences of C. burmannii (FM957802, KP092854, KP092855, KX766400, MF110036, MF110037, MF110038). It is identical with most of them in the ITS-2 region. There is no other C. camphora sequence among the top 100 BLAST hits, neither for ITS-1, nor for ITS-2, nor for the entire ITS-region. The ITS-1 part of AF272260 agrees 94.42 % with JX242469 (submitted as C. camphora, see above) and 93.95 % with JX242468 (submitted as C. burmannii, see above). The only other hit for C. camphora among the top 100 BLAST results is JN115020 (96.03 %), but with only 56 % query cover.
The result of the Illumina sequencing in the plant in question was the same for the chloroplast markers investigated, i.e. the by far most frequent reads for all of them were identical with the result of the Sanger sequencing (Cinnamomum camphora cp group #1, but trnL intron sequence like cp group #2). In the ITS sequences, we found different copies for both the ITS-1 and the ITS-2 region. The most frequent copies, with 443 reads (73 % of the total reads) for the ITS-1 and 3390 reads (52 %) for the ITS-2, were likewise identical with the sequences obtained by Sanger sequencing (MF137959, Cinnamomum camphora, ITS group #1), except for a few ambiguities, all but one near the ends (cut off for the analysis in Table 3, supplemental content online). For the ITS-1 region, we found a single alternative sequence, with much lower coverage (162 reads, 27 %). It shows five non-ambiguous base pairs difference compared to the most frequent copy, but agrees with the ITS-1 part of two of the five C. parthenoxylon sequences in GenBank (KP092858 and KX546421 = ITS group #3). The second most frequent copy for the ITS-2 region, with 2186 reads (34 %), differs from the most frequent copy by four substitutions, one ambiguity, and an indel of ten base pairs, and agrees with the ITS-2 part of the same two C. parthenoxylon sequences (KP092858 and KX546421). A third and a fourth variant retrieved for the ITS-2 region, with 617 (9 %) and 315 (5 %) reads, respectively, agree with one of the two most frequent copies in their first half, and with the other in the second. For the phylogenetic analysis, we combined the second most frequent copies of ITS-1 and ITS-2 into a single sequence (MN480757). The modeltest implemented in MEGA suggested a Tamura 3-parameter model with discrete Gamma distribution (T92+G) for the ITS data set. The result for the entire ITS region (Fig. 6) shows the Laureae (Laurus nobilis L., Lindera benzoin (L.) Blume and Neolitsea sericea (Blume) Koidz.) as sister to the Cinnamomeae, i.e. to all other taxa except the outgroup. Among the Cinnamomeae, there is a trichotomy consisting of (1) Cinnamomum sect. Cinnamomum, (2) a clade consisting of Aiouea Aubl. as sister group of the Ocotea complex, and (3) Sassafras J. Presl as sister taxon to C. sect. Camphora. However, the sequence KP092857, submitted to Gen-Bank as C. camphora, is nested among the species of C. sect. Cinnamomum. The relationships among the species of Cinnamomum and within the Ocotea complex have been described in detail in previous papers (Huang & al. 2016, Rohde & al. 2017, Trofimov & al. 2019). All sequences added to the dataset here, except KP092857 (see above), form a common clade with the other sequences of species of C. sect. Camphora. The sequences AF272260,

396
Rohwer & al.: Incongruence of morphology and DNA sequences in Cinnamomum JN115020, JX242469 and MF096119 -MF096121 form the sister group to all remaining taxa, separated from them (and often also among each other) by rather long branches. The most frequent ITS copy of the plant in question (MF110039) is nested in a clade consisting of C. camphora sequences, whereas the second most frequent copy (MN480757) is nested among C. parthenoxylon sequences. However, only a few of the nodes in this analysis reached significant bootstrap support. Exclusion of the aberrant sequences AF272260, JN115020, JX242469 and the sequences covering the ITS-2 region only does not change most bootstrap values significantly, except that the one for C. sect. Camphora increases to 99 %.
If the ITS-1 part is analysed separately (not shown), the sequences AF272260 and JX242469 form the sister group to the remaining Cinnamomeae, after separation of Cinnamomum sect. Cinnamomum, and Sassafras is unresolved with respect to C. sect. Camphora and the clade consisting of Aiouea and the Ocotea complex. Sequence JN115020 was not included because it covers only about half of the ITS-1 region.
If the ITS-2 part is analysed separately (not shown), not even the outgroup is recovered as monophyletic. Machilus grijsii and Phoebe sheareri appear as sister group to a clade consisting of the Laureae, Sassafras and the aberrant Cinnamomum camphora sequences JX242469, MF096119, MF096120 and MF096121, whereas Persea americana appears as sister taxon to the remainder of C. sect. Camphora. Cinnamomum sect. Cinnamomum appears as sister group to the clade consisting of Persea americana and C. sect. Camphora, and all these taxa appear as sister group of the clade consisting of Aiouea and the Ocotea complex. The changed relationships persist even if the aberrant sequences are excluded, but none of them reaches 50 % bootstrap support.

Discussion
A comparison of our results with previously published sequences revealed on the one hand considerable differences among sequences (supposedly) belonging to the same species, and on the other hand unexpected agreement among sequences of (supposedly) different taxa. Differences among DNA sequences (supposedly) belonging to the same taxon can be due to a variety of causes. Ideally, they would be evidence of intraspecific variability, but other possible causes such as incorrect determinations, contaminations, inadvertent swapping of samples before or during lab work, paralogous sequences or pseudogenes should be taken into account as well. It therefore makes sense to compare the results of different studies, in order to detect possible errors. Agreement of sequences among different taxa can be (and frequently is) due to low divergence in the molecular markers examined. Nevertheless, it also may help to detect errors.
In the chloroplast sequences, at least those of the single copy regions used here, there should be no problems with paralogous sequences or pseudogenes. It is therefore intriguing that such different chloroplast sequences have been found in such a widespread and well-known species as Cinnamomum camphora. The differences between the cp groups #1 and #2 observed here in some cases (psbA-trnH, matK) are larger than those found in the same molecular markers among closely related but morphologically clearly different species of Lauraceae in recent studies (e.g. Rohwer & Rudolph 2005;Huang & al. 2016;Rohde & al. 2017;Trofimov & al. 2016Trofimov & al. , 2019. On the other hand, sequences submitted as C. camphora and C. parthenoxylon were frequently found to share the same haplotype. This supports the statement of Wu & al. (2019) that "the species delimitation and interrelationship of C. camphora and C. parthenoxylon may need further investigation." The two species are usually treated as distinct, but scarcely any of the key characters separating them (e.g. in Li & al. 2008) appears to be entirely constant. The leaves are mostly triplinerved at the base in Cinnamomum camphora and penninerved in C. parthenoxylon, but not all leaves of C. camphora are triplinerved, especially on sterile branches (Fig. 1C). The lower leaf surface is usually glaucous in C. camphora, whereas it may be glaucous or not in C. parthenoxylon. Domatia in the axils of the (lower) secondary veins are common in C. camphora, but sometimes they are inconspicuous or even missing in a few leaves, whereas they are generally inconspicuous or sometimes absent in C. parthenoxylon. It is therefore quite possible that the two species may be mixed up, especially if determinations are based on sterile branches only. In addition, specimens identified as C. parthenoxylon, even by researchers familiar with the group, e.g. by A. J. G. H. Kostermans in the Naturalis Leiden herbarium (L, available on https://bioportal .naturalis.nl/), show a rather wide range of morphological variation, so that it is possible that more than one species might be involved in this complex.
Misidentifications are certainly responsible for some of the sequence diversity observed here. Numerous Lauraceae species, even in different genera, are so similar to one another that even experienced experts have a substantial rate of errors in their identifications (Liu & al. 2017b), especially of sterile material. Misidentifications can be detected by BLAST searches, if different sequences obtained from the same voucher consistently point to another species, of which several sequences prepared by different authors are available in GenBank. Among the sequences examined here, those based on "isolate SCBGP173_2" (Liu & al. 2015) may be such a case. The ITS sequence KP092857 differs by 27 -29 substitutions from the majority of the other Cinnamomum camphora sequences and agrees best with C. burmannii. In the ITS-2 region, KP092857 is completely identical with C. burmannii, and in the result of the Maximum Likelihood analysis it nested among the species of C. sect. Cinnamomum, as sister tax-Willdenowia 49 -2019 on to C. burmannii. The psbA-trnH sequence KP095536 differs by only three substitutions from most specimens of C. camphora, but is likewise identical with several accessions of C. burmannii. The matK sequence KP093546 appears compatible with C. camphora, but several sequences of C. burmannii differ by just a single mutation within the small, conserved region covered by this fragment. We therefore assume that "isolate SCBGP173_2" (IBSC) may indeed represent C. burmannii. Cinnamomum burmannii is a species of C. sect. Cinnamomum, which is characterized by (sub)opposite, strongly triplinerved or trinerved leaves without domatia, vegetative buds with inconspicuous or no bud scales, and fruits with persistent tepal bases on the margin of the cupule, whereas C. camphora and C. parthenoxylon are species of C. sect. Camphora, characterized by alternate, penninerved to weakly triplinerved leaves with domatia, vegetative buds with distinct bud scales (perulate), and cupules without remnants of tepals. Both C. burmannii and C. camphora are frequently cultivated, e.g. as street trees in S China. They are usually quite different, at least when flowering or fruiting, but sometimes the leaves are not exactly opposite in C. burmannii, and the lowermost secondary veins may be less prominent, so that misidentification of sterile material becomes conceivable.
Large distances separating a particular sequence from the majority of its supposedly conspecific sequences may also point to either a misidentification or a contamination. The matK sequences JQ435499 ("Cinnamomum camphora") and JQ435498 ("C. parthenoxylon") differ not only from these two species but from all core Lauraceae, more than these differ among each other. In this case, however, we could not find any highly similar sequence, so that we cannot tell which taxon they might represent.
The situation is more complicated in the much more variable ITS sequences. If both ITS and chloroplast sequences are available of a particular voucher specimen, then ITS group #1 usually corresponds to cp group #1 and ITS group #3 corresponds to cp group #2. However, there are exceptions. Among the sequences covering only the ITS-2 part, the Cinnamomum parthenoxylon sequences KX546421 and KX546593, both based on the collection Ci X. Q. 0036 (HITBC), are in ITS group #3, but the psbA-trnH and matK sequences from the same voucher (KX546119 and KX546924) are in cp group #1. Sequence JX242469 differs considerably from all other sequences, even in the 5.8S rDNA region, which otherwise is highly conserved among the Cinnamomeae. If it had been the only aberrant sequence, we would have dismissed it as an occasional sequencing error. However, it shares (at least) 34 substitutions and 5 indels compared to ITS group #1 with JN115020, 18 substitutions and 2 indels with the ITS-1 part of AF272260 (of which the ITS-2 part is identical with ITS group #1), and 31 substitutions and 6 indels with the ITS-2 sequences MF096119 -MF096121. Most of the substitutions and all of the indels are shared with at least one of the other aberrant sequences, often with all of them (if they cover the respective region). JN115020 even shares eight of its 15 substitutions in the 5.8S rDNA with JX242469. This suggests that ITS pseudogenes may have been sequenced in these cases. In any case, one should be wary if an ITS sequence shows an unexpectedly large divergence from those of supposedly closely related taxa.
If we exclude suspected misidentifications and pseudogene sequences, there still is considerable diversity among the sequences submitted as Cinnamomum camphora or C. parthenoxylon. Based on morphology alone, the questionable plant with the accession number 2006-1425 in the botanical garden of Munich could easily be accommodated in C. camphora, as the variability of the leaves on sterile branches is much larger in this species than on the fertile branches that are commonly photographed or preserved in herbaria. Nevertheless, our results are consistent with the assumption that the plant may be of hybrid origin. In the chloroplast genome, all or by far most reads of a certain amplicon were identical. The chloroplast genome is assumed to be maternally inherited, although to our knowledge this has not been checked in the Lauraceae so far. Only in one part of the trnK intron we found indications of different copies, but these were at least twelve times less frequent than the dominant copy. We cannot really explain these additional copies. Occasional transmission of a proplastid from the male gametophyte might be an option, but this is purely speculative. A PCR error or PCR recombination in an early cycle appears even more likely (Simon & al. 2012).
In the biparentally inherited nuclear ITS region, on the other hand, there is considerable evidence for different copies in this individual. High-throughput DNA sequencing has replaced cloning as the means to investigate the presence of multiple, divergent copies of nuclear ribosomal cistrons including ITS. For example, Zozomová-Lihová & al. (2014) supported previous hypotheses on the parents of Cardamine ×schulzii Urbanska-Worytkiewicz using 454 sequencing of ribosomal DNA. Furthermore, they found a bias toward the maternal copy. Similarly, in our case the second most frequent copy was found to be only about 1 /3 to ⅔ as frequent as the dominant copy, and this is obviously sufficient to lead to heavily disturbed sequences in direct Sanger sequencing. In both the haplotype network analysis and the maximum likelihood analysis the dominant copy is found among sequences of Cinnamomum camphora, as also the key characters suggested, but the secondary copy is found in a different group, consisting mainly of sequences submitted as C. parthenoxylon. The amount of intraspecific sequence variation is not yet well known in the Lauraceae, although a first attempt at its quantification has been made by Liu & al. (2012). However, given the amount of sequence difference between the two copies, intraspecific variation is unlikely.
It still is uncertain if the second parent really is Cinnamomum parthenoxylon, because of the morphological and molecular heterogeneity of the material attributed to this taxon (see above). For comparison, photos of a plant that we identified as C. parthenoxylon are shown in Fig.  1E, F. The ITS sequence (MF110054) obtained from this plant (Rohwer 178,MJG), however, differs by eight substitutions from the sequence of the suspected hybrid, and in the maximum likelihood analysis it is unresolved with respect to most other clades in C. sect. Camphora.
In our experience, intraspecific differences in ITS sequences are not really rare, at least if a species is widespread (compare, e.g., Ocotea aciphylla (Nees & Mart.) Mez, GenBank accession numbers DQ787422, GQ480374 and KX509866). In contrast, intraindividual variation is seldom recognized by direct amplification and sequencing, likely due to rarity of hybridization of individuals with divergent ITS-copies. In cases of offspring of parents with divergent but closely related ITS-copies just one or two double peaks are invariably retrieved in repeated sequencing attempts, suggesting polymorphisms in the respective sequence positions. Such sequences have been described, e.g. by Morden & al. (2015) for a few collections of Cryptocarya mannii Hillebr. They remain readable and can be included in phylogenetic analyses. Length mutations (indels) are more problematic. A single length mutation between two primer sites, most frequently a simple repeat of an adjacent motif, often can be resolved by sequencing toward this point from both sides. If there are several length mutations, however, cloning and (Sanger) sequencing of several clones used to be necessary to sort the different copies apart. In practice, limited resources often restricted these efforts and made it more cost-effective to omit a particular specimen and try another one. Since specific and generic delimitations among the Lauraceae are still a difficult issue, it is important to assess the possible role of hybridization in the evolution of the family. High-throughput sequencing now offers the opportunity to include collections yielding mixed signals with conventional methods, giving new insights into a still poorly explored field.