Management efforts to control starry stonewort [Nitellopsis obtusa (Desvaux in Loiseleur) J. Groves] have been limited to stressing the thalli and have not been able to directly target the reproductive bulbils. Smaller-scale efforts such as the use of hand pulling can be employed, but hand pulling is not realistic for larger infestations. This research was conducted to test the effects of clipping stress on N. obtusa to provide a baseline for the effect of stress on the production of bulbils and the regrowth of thalli. Mesocosms were set up under greenhouse conditions to test the effects on N. obtusa of simulated mechanical harvesting once, twice, and four times per growing season. Different seasonal timing and frequency of clipping treatments will remove different amounts of thalli biomass. The four-clipping treatment always reduced thalli biomass in this study at both 16 and 52 wk after treatment (WAT) compared with the nontreated reference, but there was no difference among clipping treatments at 52 WAT. At 16 WAT, one clipping reduced bulbil density by 44% (Trial 1) to 50% (Trial 2), two clippings reduced bulbil density by 28% (Trial 2) to 52% (Trial 1), and four clippings reduced bulbil density by 22% (Trial 2) to 88% (Trial 1). At 52 WAT, bulbil densities were 69% and 93% lower than those of the nontreated reference Trials 2 and 1, respectively. Results from this study indicate that clipping may be effective for N. obtusa control and could impact bulbil production.