How to translate text using browser tools
1 April 2013 A 3D Hydrodynamic Model for Determination of Flood Level inside Saemangeum Embankment
Jae-Sang Jung, Yong-Sik Cho
Author Affiliations +
Abstract

Jung, J.-S. and Cho, Y.-S., 2013. A 3D Hydrodynamic Model for Determination of Maximum Food Level inside Saemangeum Embankment

In this study, the variation of flood water level inside the Saemangeum Embankment is studied. In particular, the maximum flood level inside the Embankment is investigated for design of the land reclamation level. Water level inside the Embankment may be affected by flooding from connected rivers, tides and discharges through gates. The tidal range outside Embankment is about 6.0~7.5m. The water level is numerically simulated by using a commercial hydrodynamic model: Delft3D-Flow. By analyzing measured tidal data measured over 31 years (1981–2011), the smallest tidal difference is selected for simulations. The maximum flood level inside Embankment generally increases as the tidal difference decreases because the sea level outside Embankment is relatively high during the ebb tide.

Jae-Sang Jung and Yong-Sik Cho "A 3D Hydrodynamic Model for Determination of Flood Level inside Saemangeum Embankment," Journal of Coastal Research 65(sp1), 243-248, (1 April 2013). https://doi.org/10.2112/SI65-042.1
Received: 7 December 2012; Accepted: 6 March 2013; Published: 1 April 2013
KEYWORDS
Delft3D-Flow
estuary
gate discharge
hydrodynamic model
reclamation
RIGHTS & PERMISSIONS
Get copyright permission
Back to Top