Open Access
How to translate text using browser tools
1 October 2007 Fore Tarsus Attachment Device of the Male Scuttle Fly, Aenigmatias lubbockii
Steen Dupont, Thomas Pape
Author Affiliations +

The fore tarsus of the male scuttle fly, Aenigmatias lubbockii (Verrall) (Diptera: Phoridae), is broad and equipped with flattened and apically truncated (FAT) setae on the ventral surface, which are suggested to be involved in the intraspecific phoretic behaviour including airlifting and dispersal of the female. The combination of FAT setae on the male fore tarsi and regularly arranged microtrichia on the female thoracic surfaces is suggested to form a combination of an adhesive structure and possibly a fastener system. Comparisons are made to Puliciphora borinquenensis (Wheeler), which also has apterous females and male-facilitated female dispersal, but where fore tarsal FAT setae are absent.


Species of the scuttle fly subfamily Aenigmatiinae have long been known for their marked sexual dimorphism, the females being apterous, haltereless and limuloid or cockroach-like in appearance (Peterson 1987). The female morphology has been linked to the fact that almost all Aenigmatiinae have been recorded as being either myrmecophilic or more rarely termitophilic. Aenigmatias lubbockii (Verrall) (Diptera: Phoridae) is known to parasitize the pupae of the ants Formica fusca (Linnaeus) and F. picea (Nylander), whereas other species such as A. dorni have been observed in nests of F. rufibarbis and F. glebaria, and A. franzi was caught in the vicinity of Lasius niger and Myrmica ruginodis (Schmitz 1955; Smith 1977; Disney 1979, 1994, 2002).

The genus Aenigmatias was erected by Meinert (1890) to accommodate his new species A. blattoides [= A. lubbockii (Verrall)], which was described from a female specimen collected from a F. fusca nest. He described the female as looking more like a juvenile of the cockroach Ectobius lapponicus (Linnaeus) than as an actual fly (Meinert 1890).

The first male of A. lubbockii was described already by Verrall (1877) [in Platyphora Verrall; preoccupied], and it was not recognized as conspecific with Meinert's female of Aenigmatias until Donisthorpe (1913, 1914) reared the adults from their ant host's pupae.

Recently three male and three female specimens of A. lubbockii were found during sorting of material acquired by the Swedish Malaise Trap Project (Karlsson et al. 2005), and two pairs, one still in copula, was unexpectedly found in a window trap and a pitfall trap in Denmark. We take this opportunity to describe the structures of the male fore tarsus and discuss their suspected role in the copulatory behaviour.

Materials and Methods

Puliciphora borinquenensis (Wheeler) was chosen for comparative studies because of its apterous but otherwise habitually very different female, combined with the presence of information on mating behaviour. For each of the two species studied, a male and a female were transferred through a graded series from 70% to absolute alcohol before being processed in a Bal-Tec CPD 030 critical point drier. The specimens were then mounted on a stub and sputter-coated with platinum for 140 sec (20 nm of coating) using a Jeol JFC 2300HR high resolution fine coater. Observations and pictorial documentation were done on a Jeol JSM 6335 F scanning electron microscope. Male and female fore, mid and hind legs were taken directly from absolute alcohol, air-dried and transferred to a stub before being coated. All length measurements were taken directly from SEM printouts, and when given as an average at least five measurements were taken.


Aenigmatias lubbockii
Figures 113

Material studied

Denmark, Bornholm, Raghammer Odde, 1 male and 1 female (pitfall trap), 1 male and 1 female (window trap), 08.vii.2006, J. Pedersen (Zoological Museum, University of Copenhagen); Sweden, Gotland, Roleks, 3 males and 3 females, 7–18.viii.2006, Arne Pettersson, Malaise trap (1 male and 1 female [platinum-coated on stubs] in the Zoological Museum, University of Copenhagen, others in the Swedish Museum of Natural History, Stockholm).

Male and female habitus (Figures 1, 2).


Body length 2.1 mm. First thoracic spiracle situated dorsolaterally on notum. Thorax and abdomen as in Figure 1.

Fore tarsus 875 µm long, with tarsomere 1 about two thirds as long as tibia and almost half the combined length of tarsomeres 2–5. Mid tarsus 825 µm long, with tarsomere 1 half as long as tibia. Hind tarsus 1071 µm long, with tarsomere 1 half as long as tibia.

Fore tarsus more robust than mid and hind tarsus, as wide as tibia and distinctly flattened (Figure 3). Protarsomeres 1–3 bearing on the underside a dense ‘carpet’ of microtrichia mixed with flattened and apically truncated (FAT) setae, 4.9 µm long and 2.0 µm wide (Figures 4, 5). The FAT setae are set in distinct sockets with a tip modified into a flattened area divided by a low crest. Protarsomeres 4–5 with similar FAT setae but in a less dense arrangement and only sparsely distributed on tarsomere 5. Claws and pulvilli not particularly modified, pulvilli of medium size, pad-shaped (Figure 6).

Figures 1–11.

Aenigmatias lubbockii (Verrall), adult morphology, 1. Male habitus. 2. Female habitus. 3. Male fore, mid and hind tarsus, ventral view. 4. Male protarsomere 1 showing FAT setae of ventral surface. 5. Details of FAT setae. 6. Claws and pulvilli of male fore tarsus, ventral view. 7. Female tarsus (ventral view). 8. Lateral tergal extensions of female body, ventrolateral view. 9. Thoracic extension, ventrolateral view. 10. First abdominal extension, ventrolateral view. 11. Acanthae of first abdominal tergal extension.


Figures 12–13.

Aenigmatias lubbockii (Verrall). 12. Meinert's (1890) original illustrations of the female. 13. Hypothetical mating posture, see text for explanation.



Body length 1.6 mm, apterous with halteres lacking. Thoracic notum without subdivisions, and, together with the first three abdominal segments, laterally drawn out making these segments wider than the head. Segment length measured along the lateral margin: thorax 355 µm; abdominal segments 1–3, 177 µm, 145 µm and 148 µm respectively; total length 825 µm. The (ventro)lateral surface of these extensions is clothed with acanthae or microtrichia. The notal extensions have a mean length of 1.5 µm and were set 1.4 µm apart (measured as the average distance between the middle of two microtrichia). The first three abdominal segments have microtrichia with a mean length of 6.7 µm and set 1.4 µm apart on average (Figure 8). The first thoracic spiracle is situated dorsolaterally on the notum.

Fore tarsus 276 µm long, with tarsomere 1 approximately one third as long as tibia. Mid tarsus 345 µm, tarsomere 1 half as long as tibia. Hind tarsus 556 µm, tarsomere 1 half as long as tibia.

Protarsomere 1 about one third the combined length of protarsomeres 2–5. All tarsomeres cylindrical and carrying mainly unspecialised setae and microtrichia; all tarsomeres with a few FAT setae distributed along the ventral midline (Figure 7). Claws and pulvilli not particularly modified, pulvilli of medium size, pad-shaped (Figure 7). Mid and hind tarsi unmodified.

Puliciphora borinquenensis
Figures 14–19

Material studied

Several males and females from a culture maintained at the Hope Entomological Collections, Oxford University Museum of Natural History.

Male and female habitus as in Figures 14, 15.


Body length 1.2 mm. Fore tarsus cylindrical, 346 µm, with tarsomere 1 half as long as tibia and less than one third of the combined length of tarsomeres 2–5. Mid tarsus 375 µm long, with tarsomere 1 almost half as long as tibia. Hind tarsus 444 µm long, with tarsomere 1 half as long as tibia and with 5–6 comb-like rows of large setae posteriorly (Figure 17). All tarsi with ventro-lateral palisade-like rows of leaf-like flattened setae (Figure 16) but otherwise without specialised setae on the ventral surface. Pulvilli reduced compared to A. lubbockii, present as a central rod or axis with scattered acanthae (Figure 18).

Figures 14–19.

Puliciphora borinquenensis (Wheeler), adult morphology. 14. Male habitus. 15. Female habitus. 16. Male fore, mid, and hind tarsus, ventrolateral view. 17. Male hind tarsomere 1, posterior view. 18. Claws and pulvilli of male fore tarsus, ventral view. 19. Female thorax, right lateral view.



Body length 1.3 mm, apterous with halteres lacking. Division between thorax and abdomen distinct. Thorax reduced in size, with pronotum very reduced, mesonotum humped, and metanotum and the anterior part of the first abdominal segment forming a saddle-shaped recession (Figure 19). Metanotum and posterior half of metapleuron lacking setae and microtrichia, appearing entirely smooth.

Fore tarsus 225 µm, with tarsomere 1 approximately half as long as tibia and half the combined length of tarsomeres 2–5. Mid tarsus 237 µm long, with tarsomere 1 almost half as long as tibia. Hind tarsus 385 µm long, with tarsomere 1 between half and two thirds as long as tibia. No flattened setae present ventrally on fore and mid legs, tarsomere 1 of hind leg with 2 palisade-like rows of flattened setae, resembling those on all male tarsi. Claws and pulvilli as in male.


The ability of the male Aenigmatias to carry and disperse the apterous female was first mentioned by Schmitz (1955: 361), who stated that “During copulation the female, which is hidden under the belly of the male, is carried away by him in flight” (our translation). While direct field observations seem to be lacking, the indirect evidence is compelling, for example, the invariable presence of exactly the same number of males and females in Malaise traps (Goto and Takeno 1983; present study; B. Brown personal communication). Intraspecific phoresy has also been observed elsewhere among phorids. The male P. borinquenensis is capable of carrying its apterous female at least 3.6 m in a single flight (Miller 1979), and probably even further (3.6 m was the physical limit set by Miller's experimental design). Miller's experiment also showed that several such flights were usually made with different females, showing that if necessary consecutive flights could be performed to reach a more distant oviposition site. The fully winged female of Megaselia scalaris (Loew) may also be dispersed by the male during copulation, but the presence and use of wings by the female makes true intraspecific phoresy less likely (Miller 1979).

The need of intraspecific phoresy with a male carrier may be associated with specializations in the requirements of the eggs and larvae for survival and development. The more specialized and uncommon an oviposition site is, e.g., decaying beetles, certain ant nests or specific decaying fruits, the more advantageous it could be to have the male spending energy carrying the female to a suitable egg laying site, especially if the females are less mobile than the males. Miller (1984) observed that the male P. borinquenensis was able to remember the location of oviposition sites, and thereby carry several females straight to these sites. Such dependency on specific oviposition sites would probably be strongly selective for (or at least evolve in parallel with) morphological specialisations. Females of both P. borinquenensis and A. lubbockii seem to have undergone morphological adaptations in order to better utilise their oviposition sites. Females of both species have lost their wings and halteres, which is most probably related to their habits of burrowing in decomposing matter and living within ant nests respectively, both of which are subterranean (or at least subsurface) activities. Their body shapes, however, are markedly different, reflecting the differences in their life habits. The female P. bonnquenensis has a deformable thorax and abdomen that allows it to burrow through decaying matter with the help of peristaltic movements (Miller 1979). In contrast, the female A. lubbockii has evolved a flattened, cockroach-like body shape with large, laterally extended thoracic and anterior abdominal tergites, which may assist and/or protect her when moving around in the ant nest.

Airlifting the female requires that the male be able to hold firmly on to her, either by simply wrapping his legs around the female body, or by using specialised structures. The common dipteran adhesive structures are paired pulvilli on the terminal tarsal segment, which can be seen for males of A. lubbockii and P. borinquenensis in Figures 6 and 18. The hair-like structures on the adhesive pads (i.e., on the pulvilli) are cuticular, single-celled protuberances or acanthae (Gorb et al. 2001). These work by maximizing the area in contact with the substratum, combined with attractive capillary forces mediated, as in many insects, by pad secretions (Gorb et al. 2002; Beutel and Gorb 2001). These adhesive structures are common among Diptera and allow them to walk on smooth, vertical and overhanging surfaces.

The pulvilli of P. borinquenensis are reduced compared to those of A. lubbockii, but none of them are particularly well developed. The common airlifting behaviour of both species and the large difference in pulvilli size may suggest that there are other structures than these involved in holding the female during flight. Miller (1979) observed that the male P. borinquenensis pounces on the female and grasps her around the abdomen with his mid legs. Neither the female abdomen nor the male mid legs of P. borinquenensis appear to have any specialized structures adapted for securing the male grip on the female.

The large and flattened fore tarsomeres of the male A. lubbockii and the numerous FAT setae present on the ventral surface (Figures 4, 5) are here hypothesised to be instrumental in the seizing and holding of the female during copulation and flight. The increase in contact area represented by the FAT setae relates well to the similar condition attained by the numerous spatulate acanthae of the dipteran pulvillus as described by Beutel and Gorb (2001).

Friction-based systems of attachment occur, where both contacting surfaces are predefined and can interact with each other (Gorb et al. 2002). Such systems are described by Gorb (1999a, 1999b) in his studies of head-arresting systems, inter-segmental fixators and elytra-locking mechanisms. The advantages of such structures are energy efficiency and stability. Energy is usually only required during fixation and release of the two interacting surfaces. Once energy is spent interlocking or unlocking the surfaces, they will remain together without any further energy costs. The stability of these structures comes from the interaction between the two surfaces that interlock and fixate to each other. Furthermore, the two surfaces need not be precisely positioned, and they have a fast and reversible firm and tight grip (Beutel and Gorb 2001). One of the key elements is the friction force created by the two opposing cuticular elements as they slide past and distort each other (Gorb and Popov 2001).

In Aenigmatias lubbockii, the dimensions of the male fore tarsal FAT setae and the acanthae or microtrichia on the lateral surface of the female thoracic and abdominal tergal extensions suggest the existence of a similar attachment system. The microtrichia on the female abdominal tergal extensions have a mean length of 6.7 µm and are arranged about 1.4 µm apart, while the FAT setae of the male fore tarsus are about 4.9 µm long and 2.0 µm wide. The position of the male fore tarsus hypothesized in Figure 13 would ensure friction forces caused by the dissimilarity in the width of the FAT setae and the spacing between the individual microtrichia on the female, together with resistance caused by the flattened arrow-head shaped FAT setae wedging between the microtrichia.

The female body seems to have its main division more between abdominal segments 3 and 4 than between the thorax and abdominal segment one (Figure 2). The thorax plus the three following abdominal tergites, though not fused, are very tightly connected and appear to form a separate unit or tagma. A ventrolateral view shows that the thorax and the first three abdominal segments possess structurally similar and closely appressed marginal extensions (Figure 8). This shift in tagmosis was also observed by Meinert (1890) when he described the female A. blattoides (= lubbockii), as can be seen from his illustration of the female habitus (Figure 12). Meinert, however, misinterpreted the segmental homologies when he wrote: “But even more astounding is it, that the thorax far from being fused is divided into its rings, and that these rings are not joined by sutures, but that they are overhanging and together with the abdominal rings create a row of overhanging rings. The thorax is not here distinct as a separate section of the insect body” (Meinert 1890: 224, our translation). Meinert's astonishment was caused by his misinterpretation of the extent of the thorax, which in Diptera in general is dominated by the mesothorax and with only remnants left of pro- and metathorax. In the quoted passage, Meinert describes the thorax and the following abdominal segments.

We are here hypothesising that this division of the body is convenient if the female is to be lifted, as it may give the male a more rigid and stable grip. The length along the margin of the tergal extensions and the combined length of the male fore tarsal segments are very similar. The extensions would seem to provide an ideal shelf for the male to position his fore tarsi so that tarsomeres 1–3 fit under the thoracic and first two abdominal tergal extensions, and the two last tarsomeres fit under the extension of the third abdominal segment. Miller's (1980) observation of the copulation sequences of P. borinquenensis shows that the male, while mounted, is capable of reaching the ground with the tip of his fore legs. In this position, the distal end of the fore tibia reaches approximately the anterior corner of the female notum. In the case of A. lubbockii, the copulatory position with a firm grip under the tergal shelf would be attainable from such a position by the fore tarsi folding backwards and upwards, clasping on to the ventral side of the tergal extensions as shown in Figure 13. In this position, the male would be able to hold the female firmly in place both during flight and on the ground.


Paper copies of this article will be deposited in the following libraries. Senckenberg Library, Frankfurt Germany; National Museum of Natural History, Paris, France; Field Museum of Natural History, Chicago, Illinois USA; the University of Wisconsin, Madison, USA; the University of Arizona, Tucson, Arizona USA; Smithsonian Institution Libraries, Washington D.C. U.S.A.; The Linnean Society, London, England.


We are grateful to Mrs Kajsa Glemhorn, Ecological Research Station, Öland, Sweden, and Mr. Jan Pedersen, Zoological Museum, Copenhagen, Denmark, for providing the specimens of A. lubbockii, and to Mr. Barren J. Mann, Hope Entomological Collections, England, for providing P. borinquenensis. Dr Marion Kotrba, Zoologische Staatssammlung München, Germany, helped with a translation from Schmitz' original work, and Drs Henry Disney, University of Cambridge, England, and Brian Brown, Los Angeles County Museum, USA, generously provided valuable advice and kindly commented on the manuscript.



RG Beutel , SN Gorb. 2001. Ultrastructure of attachment specializations of Hexapoda (Arthropoda): evolutionary patterns inferred from revised ordinal phylogeny. Journal of Zoological Systematics and Evolutionary Research 39: 177–207. Google Scholar


Disney RHL . 1979. Natural history notes on some British Phoridae (Diptera) with comments on a changing picture. Entomologist's Gazette 30:141–150. Google Scholar


RHL Disney. 1994. Scuttle flies: The Phoridae. Chapman and Hall. Google Scholar


Disney RHL . 2002. Revisionary notes and new key to Aenigmatias Meinert (Diptera, Phoridae). Fragmenta Faunistica 45: 67–72. Google Scholar


Donisthorpe HStJK . 1913. Aenigmatias blattoides, Meinert, captured in Scotland. Entomologist' Record and Journal of Variation 25: 277–278. Google Scholar


Donisthorpe HStJK . 1914. Some notes on the genera Platyphora Verrall, and Aenigmatias, Meinert, and a species new to Britain. Entomologist's Record and Journal of Variation 26: 276–278. Google Scholar


Gorb SN . 1999a. Evolution of the dragonfly head arresting systems. Proceedings of the Royal Society B 266: 525–535. Google Scholar


Gorb SN . 1999b. Ultrastructure of the thoracic dorso-medial field (TDM) in the elytra-to-body arresting mechanism in tenebrionid beetles (Coleoptera: Tenebrionidae). Journal of Morphology London 250: 479–494. Google Scholar


SN Gorb , RG Beutel , Gorb EV , Jiao Y , Kastner V , Niederegger S , Popov VL , Scherge M , Schwarz U , Votsch W . 2002. Structural design and biomechanics of friction-based releasable attachment devices in insects. Integrative and Comparative Biology 42:1127–1139. Google Scholar


SN Gorb , EV Gorb , Kastner V . 2001. Scale effects on the attachment pads and friction forces in syrphid flies (Diptera, Syrphidae). Journal of Experimental Biology 204: 1421–1431. Google Scholar


SN Gorb , VL Popov. 2001. Probabilistic fasteners with parabolic elements: biological system, artificial model and theoretical considerations. Philosophical Transactions of the Royal Society of London 360: 211–225. Google Scholar


T Goto , K Takeno. 1983. Discovery of the genus Aenigmatias Meinert from Japan, with a redescription of A. dorni (Enderlein) (Diptera, Phoridae). Esakia 20: 139–148. Google Scholar


D Karlsson , T Pape , Johanson KA , Liljeblad J , Ronquist F . 2005. The Swedish Malaise trap project, or how many species of Hymenoptera and Diptera are there in Sweden?. Entomologisk Tidskrift 126: 43–53. [In Swedish with English abstract.] Google Scholar


Meinert F . 1890. Aenigmatias blattoides; Dipteron novum apterum. Plate 4. Entomologiske Meddelelser 2: 212–226. Google Scholar


Miller PL . 1979. Intraspecific phorid phoresy. Entomologists Monthly Magazine 114: 211–214. Google Scholar


Miller PL . 1984. Alternative reproduction routines in a small fly, Puliciphora borinquenensis (Diptera: Phoridae). Ecological Entomology 9: 293–302. Google Scholar


Peterson BV . 1987. Phoridae. In: JF McAlpine , BV Peterson , GE Shelwell , HJ Teskey , JR Vockeroth , DM Wood , editors. Manual of Neartic Diptera , Vol. 2, pp. 689–712. Agriculture Canada. Google Scholar


Schmitz H . 1955. Phoridae. Die Fliegen der Palaearktischen Region 33: 321–368. Google Scholar


Smith KGV . 1977. Notes on some British Phoridae (Diptera) including two species of Megaselia Rondani new to science. Emtomologist's Record and Journal of Variation 89:161–168. Google Scholar


Verrall GH . 1877. Description of a new genus and species of Phoridae parasitic on ants. Plate XVII. Zoological Journal of the Linnean Society 13: 258–260. Google Scholar
This is an open access paper. We use the Creative Commons Attribution 2.5 license that permits unrestricted use, provided that the paper is properly attributed.
Steen Dupont and Thomas Pape "Fore Tarsus Attachment Device of the Male Scuttle Fly, Aenigmatias lubbockii," Journal of Insect Science 7(54), 1-8, (1 October 2007).
Received: 14 December 2006; Accepted: 1 March 2007; Published: 1 October 2007
adhesive structure
female dispersal
flattened and apically truncated - FAT - setae
mating position
probable fastener system
Puliciphora borinquenensis
Back to Top